This article presents information about facades, their thermal insulating role in buildings in Albania. The façade in construction is one of the necessary factors to ensure a longer life of the buildings and indoor thermal comfort. Façade systems are composed of different materials, which provide a protective effect during the life of the building. The article will focus on the characteristic materials used in Albania for the construction of facades and the main materials used from the year 2000 (...) up to today. The article will be informative, statistical, and comparative in order to draw conclusions. Nowadays building facades are again becoming one of the main subjects of discussion, undoubtedly due to the increasing importance of the building envelope in relation to energy consumption. In the 90s, minimal attention was paid to the efficiency and quality of facades; everything was done strictly in relation to residency requirements. But, during this last decade, Albania experienced a construction boom, with a series of good new buildings, which are accompanied by progress in the architectural style and in the techniques of building materials usage. However, the advantages of façade systems in construction are not only to make the building long-lasting. The function of facades always undergoes changes and advances over time, in terms of their impact on the temperature fluctuations inside the building or energy storage. (shrink)

The need to design and build according to the resident’s demands is the best possible option, in today's economic market. Nowadays, buildings that ensure a good thermal performance is increasing. This article compares the thermal transmittance coefficient (U-value) between a wall with a simple composition of bricks, plaster and graffito without thermal insulation and a wall composed of stone wool, anti-vapors membrane, air gap and terracotta tiles (ventilated façade). This comparison explains the thermal benefits and (...) the best ways to increase the thermal performance of a building, in a particular case of Polis University, Tirana, Albania. The results and conclusions drawn from this article are factual indicators with concrete values that professionals should take into consideration since in the initial stage of design. Choosing the best layers for a façade may result in the creation of a comfortable indoor thermal comfort for the inhabitance in a micro perspective. A good thermal insulation improves the building’s thermal balance and contributes decisively to the thermal comfort of the occupants, which means a considerable reduction in heating and cooling loads, in order to increase the building’s energy efficiency. The measurements of this comparative analysis will be done by using a specific instrument such as Testo 435-2. Atmospheric conditions will also be considered during the measurements, respectively for internal and external environments. (shrink)

Albania is part of the emerging economies of the Western Balkan region. Polis University is one of the pioneering institutions in the field of architecture, built environment, and city sciences that represents innovative methodologies and concepts for educational and scientific purposes. Nowadays, many constructions in Albania involve a wide range of different materials. The building envelope is one of the main elements that provide protection from the outside environment but also the required thermal comfort for the inhabitants. The necessary (...) balance must be archived between energy efficiency and the durability of buildings. This paper will focus on the thermal performance and materials composition of two different types of masonry walls, a constituent part of Polis University's main building. The study will be based on an experiment using specific instruments to diagnose these typologies of wall composition. The results are further analyzed and compared. Specific instruments such as the thermal camera (Testo 882), U-value(Testo 435-2), and “Silverline Digital Moisture Meter” (from POLIS Energy lab) are engaged. The collected data are further interpreted through graphs, tables, and diagrams for both cases. It is observed that ventilated facades perform much better than standard facades, therefore their usage is strongly recommended. (shrink)

The main bioclimatic passive strategies include optimization of the use of natural light, reducing the need for artificial light, maximizing the solar gain using thermal traps and promotion of natural ventilation in order to avoid the need for air conditioning for cooling. The usage of cool air passing through the underground tunnels located in the selected neighborhood in Tirana in order to enhance the cooling process is of huge importance. On the other hand, the building must benefit from the (...) passive solar systems and thermal energy conservation strategies implementing thermal insulation materials. These strategies improve both the indoor comfort and economic aspect. The aim is to be aware of the community for the big benefits of such strategies, increasing the number of passive bioclimatic implementations not only in Albania but also in the region. Through the use of such systems the building can obtain indoor thermal comfort without a traditional cooling system. The passive systems discourage the use of mechanical systems for lighting, cooling, and heating, supporting the natural phenomena such as power of the sun, underground constant temperature, wind direction, and other climate parameters. The selection of the proper thermal insulation materials is complex and sometimes determinant in order to reduce heat gain. The thermal accumulation capacity depends on material width, material type, density, and porosity of the material. The top insulating materials are mostly used in the Tirana. Albania is the expanded polystyrene (EPS). The energy needed for its production is relatively low compared to the other insulating materials. Passive design encourages the application of such kind of materials, reducing the ecological footprint of the buildings. Water recycling is another aspect that bioclimatic design takes into consideration, promoting it. The use of specific materials in order to recycle the rain water through drainage is an important task. The building is faced with significant thermal losses due to the windows. The sizing of the glass area, the orientation, as well as the choice of glass determine the penetration of solar radiation in the building. The selection of the correct type of window is also a complex task. The designer should consider the climate type, the area of the openings, the typology of the window, and the characteristics of the window materials and its thermal performance before implementing it. The usage of the high thermal capacity materials (stone, water) is getting noticed nowadays in bioclimatic and passive building designs. These materials are efficient when having large surfaces and face a strong solar radiation. PCM (phase change materials) are innovative materials that undergo a physical transformation stabilizing the temperature fluctuations in the indoor area of the building archiving and improving thermal comfort parameters inside the building. The typology of such materials and their field of implementation is a very large one. Such materials have resulted to be an added value when implemented and are part of passive systems such as Trombe wall, enhancing its performance. The piezo-electric materials are another group of innovative materials used to gain energy. Their role in energy gaining nowadays is very small but the future belongs to them. The use of such materials is promoted by bioclimatic design benefiting by their mechanical properties, producing electricity. The Empathic house is one of the examples of the future generations. The implementation of some other materials such as ETFE in the building envelope in contrast to glass allows the long-wave penetration inside the building increasing the solar gain capacity. The visibility of such materials is still under examination. (shrink)

The bioclimatic architecture is still fascinating to all of us. The lack of energy that the world is facing nowadays is forcing architects and engineers to implement smart solutions benefiting at the maximum from nature itself without considering the primary sources of energy that the world is actually using. Bioclimatic design has the roots in history, despite the fact that little attention has been paid to it throughout history. It is important to understand how natural systems operates, creating closed or (...) semi-closed systems that mirror the ecological systems on Earth. The components of bioclimatic design deal mostly with: climate type and requirements; adaptive thermal comfort; vernacular and contextual solutions; tools and assessment methods; microclimate; sun path; wind; rain; passive and active systems and responsive forms. The aim of the bioclimatic design is to improve the natural environment through the utilization of clean energy and renewable energy system; to reduce the need for energy for heating purposes; and to reduce the energy for cooling proposes, air conditioning and lighting. Furthermore, bioclimatic design involves changes in regulation, improves the house comfort, and also improves urban quality of life. Bioclimatic buildings also include the use of building elements such as walls, windows, roofs, and floors, in order to collect, store, and distribute solar thermal energy and to prevent overheating. The aim is to manage the energy flows providing comfortable conditions during the entire year and the entire day. Minimization of thermal losses and utilization of climatic conditions (climate; microclimate, sunrise) are other important issues to consider. According to many studies, the best orientation for a building in order to maximize the heat gain during winter is east–west and the primary façade should face south. Sustainability is mostly an outcome, rather than a goal or a process. The aim of all designers is to reduce the ecological footprints and to improve the quality of life. The energy sustainability and the use of natural resources must be an integral part of a sustainable development. Nowadays, there are softwares that are developed in order to carry out environmental assessment tools and standards, in order to draw conclusions about internal thermal comfort; uncomfortable times in the building during the entire year; the need for shading devices and their dimensions; energy use, energy cost, etc. Simulations are essential in the design process. Examples chosen as case studies participate to have a better insight into the overall approach of the bioclimatic design. Applying the principles of bioclimatic design remains still a challenge in redefining the perfect bioclimatic house. (shrink)

Instead of relying on the usual price elasticity technique, this book combines economic and engineering analysis to study economic growth and energy demands to the year 2000. It asserts that future energy demand will be determined by two basic factors--the gross national product and the efficiency with which energy is used to produce this output in the household, commercial, industrial, and transport sectors of the economy.Labor hours multiplied by a productivity factor results in the GNP. This study predicts that, in (...) the long run, productivity in the United States will recover most of the sharp losses registered in the past five years. The study points out the decelerating population growth, the higher number of women in the labor force, and new investments as having an influence on this situation.After projecting the size and composition of each of the four energy consuming sectors that account for the total GNP. Energy and Economic Growth estimates efficiency improvements for each. It shows, for example, that higher levels of thermal insulation will reduce sharply energy needs for household heating and cooling. Similarly, the study notes that improvements in energy consumption per dollar of output can be made for each of the energy intensive manufacturing industries, nothing that although the savings in energy are significant, none is a consequence of pushing improvements to known technological limits. Finally, the book establishes the price elasticities that are inherent in the calculated energy requirements and checks these against elasticity estimates made by other researchers. (shrink)

The focus of the paper is the comparison between the two composite aluminum panels, respectively Alpolic and Durabond. The paper is going to explore their reaction when interacting with Tirana`s climatological factors and their tension strength through an experiment, in order to find out which panel displays the best performance. The construction urge is constantly evolving, especially in Tirana mostly because it is the main industrial and economical district of Albania. It is distinguished that innovative technology is being used in (...) facades of the new buildings. One of the features that finds massive use in façade coating in the city is the application of ventilated facades equipped with external aluminum composite panels. This paper is going to deal with two buildings with different typologies of external coating, including the different types of aluminum panels. The analysis will focus on identifying each panel property such as tension strength; their respond to various external factors; their thermal conductivity; and their manufacturing companies which have been selected and produced. Within this paper graphics displays of the records will be included, offering concentrated information and a high level of reliability for both aluminum composite panels. (shrink)

Many countries in Eastern Europe, during the 1960–1970s, as well as Albania responded to the growing demand for new houses utilizing the emerging trends for industrialization of the construction process and mass construction of prefabricated residential buildings based on large-panel prefabricated RC elements. During the 1970s large-panel buildings spread throughout the country and became the main type of construction in the Albanian cities such as Shkodër, Tirana, Durrës, Elbasan, Berat, etc. Most of these buildings have five or six stories and (...) comprise different modules, the number of which depends on the urban and architectonic projects. The construction technology of these types of buildings included only the construction of prefabricated reinforced concrete material and did not take into account the energy performance of these structures. Since the moment of construction, only in the last year, several interventions have been made in different cities where a layer of polystyrene has been placed on the external walls of these buildings in order to enhance their thermal insulation. The aim of this paper is to improve the thermal performance of these buildings by introducing a comparison of their initial situation as they are today and how their performance would be if innovative technologies and materials were applied. The study is going to analyse the thermal performance of the existing buildings, by means of the thermal camera in the city of Kamez, located in Tirana, which has been chosen as a key study. Furthermore, the data obtained from the MEEC application are gathered, in order to compare the previous, the existing situation and the proposed intervention. The results may be used by municipalities of different cities, not only in the Albanian context, either where interventions have been made to improve their performance, or for municipalities where thermal regulation policies have not been yet implemented for these types of buildings. The existing situation of the buildings according to the calculations, showed a poor thermal performance, regardless of the fact that they are already equipped with thermal insulation building envelope. They have to be requalified in order to be categorized as a building with high thermal performance. (shrink)

Extruded polystyrene (XPS) otherwise known as a thermoplastic polymer has a closed cell structure and is often stronger, with a higher mechanical performance. XPS is a pressed material and is sold in different thicknesses ranging from 2 cm to 10 cm, thus having a weight that varies from 28 to 45 kg/m3 due to the force and pressure exerted on it. In general, XPS material has very low thermal conductivity and is resistant to bending. This material obtains typical values (...) of thermal conductivity between 0.025 and 0.040 W/m∙K., which means that it is ideal for surfaces that have to withstand weight, continuous traffic, etc. It is also resistant to moisture absorption and has a homogeneous density. Other characteristics of the material are good acoustic properties, easy assembly, and high durability over time. It should always be kept in mind that the surface where the thermal insulation will be applied must be leveled, cleaned, and dried. Primer is applied, before placing the thermal insulation on the surface. Then, XPS boards are placed on the surface, adhering to the corresponding mortar. This paper will deal with different cases of application of XPS tiles in the city of Tirana. A closer look at the resistance of this material from the day of application until today will be analyzed. The results during the observations showed high thermal stability of the material and no mold surface. EPS Expanded Polystyrene, otherwise known by the Dow Chemical trademark name STYROFOAM, is a lightweight product made from expanded plastic beads. It was first discovered by Eduard Simon in 1839 in Germany. EPS in its composition has 95% air and only about 5% plastic. This material is used because of its excellent properties, including good thermal insulation, good protective properties, and extremely lightweight. EPS is inert in nature and therefore does not result in any chemical reaction. EPS is durable, strong, and lightweight and can be used as an insulated panel system for facades, walls, roofs, and floors, as floating material in marine construction, and as a lightweight filler in road and railway construction. Different examples from the city of Tirana, of buildings where XPS and EPS materials are applied, are going to be analyzed, drawing conclusions. (shrink)

A bioclimatic eco-renovation project can be implemented in every cell of the city, both in the existing buildings and in the new ones. Reducing the demand for energy can result in the creation of zero-energy houses. Implementing a bioclimatic eco-renovation project is a courageous and innovative initiative. The heat exchange through the building envelope should be controlled since in the early stage of design. The passive design strategies depend on the orientation of the different areas of the building, considering also (...) the glazing areas, the use of different shading devices, the thermal trap zone, thermal masses, ventilation strategies, etc. Greenhouses as one of the basis systems of passive strategies, are designed to conduct desired air to other spaces via direct opening adding special materials for conduction. Greenhouses are constructed to connect inner spaces as a heat transferor. They have the character of a transitional space, located between the indoor and outdoor environment. During the winter their inner temperature is higher as a consequence of the thermal trap meanwhile during summer such structures must be ventilated. Thermal mass is generally applied to the floor or masonry. The use of shading devices is also important during summer in order to reduce the penetration of solar radiation into the building as well as planting vegetation. The applied green houses in Tirana case study are sized according to the international normative, considering also the climate characteristics of the zone. The implementation of the solar chimneys (another passive system) is necessary in order to subtract the fresh air form the anti-bombing underground tunnels, bringing it to the customers (residents). The benefits of such strategy are enormous. The combination of them with the anti-bombing tunnels located in the selected neighborhood in Tirana is crucial, in order to subtract the cool air from the underground due to temperature and air pressure differences. The aim is to include the existing buildings within the comfort zone without the use of mechanical systems. There are also undermined temperature measurements of the underground and ground surface, very close to the zone during winter and summer, in order to better clarify the temperature differences between the areas. It is found that the temperatures of the underground area are relatively constant compared to the ground surface. Photovoltaics panels implemented in the project can convert sunlight into electricity and are considered as solar systems. According to the electricity demand of the inhabitants, specific calculations using Canadian RETScreen expert application in order to fulfill their electricity requirements for one of the buildings located in the neighborhood are undermined. It is observed that the implementation of the PV panels will reduce the GHG emission compared to the base case and also the gross annual GHG will be reduced too. The recycling of the rain water and wastewater is considered too, using reed bed strategy and fertilizing bathing tubes. The solar tube is another technology applied in all the dwellings, which turned to have a very good performance, saving a lot of electrical energy. A specific and unique proposal is designed in order to fulfill graphically the proposed ideas in combination with a software simulation application, MEEC (Montenegrin Energy Efficiency Certification) which is finally used as a tool of better understanding the thermal performance of the considered building as part of the neighborhood. Two scenarios are involved in order to draw conclusions and enhance the building thermal performance category. It is revealed that the added greenhouses involved in the second scenario contribute massively improving the thermal performance of the building. (shrink)

This paper presents information about the moisture content and temperature level of brick walls in Tirana, Albania. The buildings whose walls have been studied were built in two different eras, throughout the twentieth century, and in more recent times. Given that during the second half of the twentieth century, Albania has been isolated from most of Europe and the West, and consequently the new architectural ideologies of the time, have not had the proper implementation there, the paper focuses on the (...) characteristic types of bricks used in Albania, the functions for which they are used, and their effectiveness in achieving comfort (thermal, moisture content control) during the two time periods mentioned above. Depending on the functions bricks perform in the walls studied in this paper, the walls are separated into two main groups: Walls in which bricks have structural role (red silicate brick walls, white silicate brick walls) and walls in which bricks do not have structural role (concrete block walls, holed brick walls). For all the types of bricks mentioned above, indoor moisture content and temperature measurements have been performed in all four cardinal directions. For the walls in which the bricks have a structural function, moisture measurements have been performed in all the facades of the buildings, because moisture in the bricks of these types of buildings, being a very important factor, directly affects the structural performance of the elements. The aim of the paper is to show the differences in moisture and temperature levels of the walls of these buildings, depending on the engineering and architectural techniques used during the building process, the use of insulation, and the masonry composition. (shrink)

The city of Tirana during the period of socialism (1944–1990) has been through a relatively large change in the field of construction. The motto of the time was standardization and typification in order to build quick, and to meet the needs of the population, fulfilling the demands of the market for new constructions. The quality of the constructions was very poor in terms of building materials and surface area predicted per inhabitance. Meanwhile, the predicted static parameters of the buildings reveal (...) to be in good performance. The specific area taken into consideration located in the outskirts of the inner historical ring of Tirana is characterized by constructions realized during 1965–1980. The buildings are standing using retaining walls, according to the technical construction parameters of the time. The aim of the questionnaire implementation in the neighborhood is to have better insights into the social, economic and inhabitance behavior within the neighborhood. It is going to be analyzed their lifestyle, pollution in the area, their level of satisfaction, the actual conditions of the buildings, electricity consumption, water consumption, heating and cooling instruments, ventilation habits, etc. The results showed that the level of loyalty to the buildings is high, although the building physical conditions are very poor and their level of satisfaction living in the neighborhood is above average. Their level of satisfaction considers more the location of the neighborhood than the physical conditions of the buildings. The inhabitance agreed with a hypothetic thermal performance improvement of their buildings although sometimes the additional surface is required as the main priority and as a very important quality of life parameter. (shrink)

Climate has a strong influence on urban planning and also plays a fundamental role in soil composition affecting the character of plants and animals. The climate is a combination of different meteorological factors that characterized a specific region over a specific time. The movement of the Sun and Earth inclination toward it is the most important factors which determine the characteristics of the climate. The global movement of the air from equator toward poles and vice versa influences also drastically the (...) climate change. In this section are also included breezes. Also air relative humidity plays an important role shaping the climate. It plays a very important role in cloud formation. The built environment can influence the urban climate of the city through height, form, and applied building materials. Building form and shape, building materials, openings in the façade, and their orientation often are determined by climate parameters. Urban density, directions, and street network and their shape are related to the climate change, apart from topography. Density of urban structures produces important effects on the microclimatic conditions in external spaces. The bioclimatic behavior of each type of outdoor spaces depends on the relationship with its surrounding elements. The city of Tirana is included in Mediterranean climate characterized by hot dry summers and mild cold wet winters with high daily thermal excursions. All of the countries bordering the Mediterranean Sea benefit from the Mediterranean climate. Specifically spotted, Tirana is part of Mediterranean coastal zone (<22 °C in temperature) with an annual temperature of 15.3 °C. In the inner city can be found areas with high pollution, which normally contain a high percentage of business and industry, settlements, and traffic, so-called “sealed” areas. They constitute “hyperthermic areas” or “heat islands”. The term “heat island” describes built-up areas which are hotter than nearby rural areas. Heat islands can affect communities by increasing summertime peak energy demand, air-conditioning costs, air pollution, greenhouse gas emissions, heat-related illness and mortality, and water quality. The aim of the bioclimatic design is also the reduction of the heat-island phenomenon. The use of materials with different energy absorption capabilities and integration of green spaces into urban life is important. The vegetation effects on microclimate and in the built environment are present. Trees are necessary and indispensable to human life. They provide shelter for us, provide food, and their fibers cloth us. Implementation of the green belts in the city is one of the strategies in order to reduce heat-island effect. Vegetation also can provide a deep feeling of attachment to certain places and trees which are part of it. The use of trees avoids monotony and ensures diversification. They play a crucial role creating microclimates which influence the thermal comfort of people reducing heating or cooling loads. Vegetation also creates cooler microclimates around the building through evapotranspiration, reduces wind speed, regulates humidity, and reduces temperature. It is observed that tree species have a greater influence on humidity than on temperature. Trees can also absorb and reduce the reverberation time of the sound, behaving as sound buffers. The benefits of tree plantation in the inner city are enormous and they can’t be neglected. (shrink)

I propose that neural cognition is supported by non-neural storage of a 3-D model of local space, used in the planning of movements. Information is stored in wave-like excitations which couple to neurons in the thalamus, with the wave-vectors of excitations representing spatial positions. This hybrid of neural and non-neural cognition may have fitness advantages over any purely neural mechanism -- in information capacity, geometric accuracy, and fast selective retrieval. The wave excitations may be sustained on a Bose-condensed state of (...) some excitation in the brain, by a mechanism like those investigated by Frohlich, Umezawa, Vitiello and others. These states, being frictionless, can store information indefinitely at low energy levels, insulated from thermal noise, so are an ideal substrate for memory. If a Bose-condensed state is a 3-D representation of local reality, it may be the basis of phenomenal consciousness . The resulting theory of consciousness is highly constrained, and agrees well with the main properties of conscious experience. In this account, consciousness arises from a very simple state of matter, rather than from complexity; and it evolved to meet one of the strongest selection pressures on the brain. (shrink)

Severe staffing shortages have emerged as a prominent threat to maintaining usual standards of care during the COVID-2019 pandemic. In dire settings of crisis capacity, healthcare systems assume the ethical duty to maximise aggregate population-level benefit of existing resources. To this end, existing plans for rationing mechanical ventilators and intensive care unit beds in crisis capacity focus on selecting individual patients who are most likely to survive and prioritising these patients to receive scarce resources. However, staffing capacity is conceptually different (...) from availability of these types of discrete resources, and the existing strategy of identifying and prioritising patients with the best prognosis cannot be readily adapted to fit this real-world scenario. We propose that two alternative approaches to staffing resource allocation offer a better conceptual fit: (1)prioritise the worst off: restrict access to acute care services and hospital admission for patients at relatively low clinical risk and (2)prioritise staff interventions with high near-term value: universally restrict selected interventions and treatments that require substantial staff time and/or energy but offer minimal near-term patient benefit. These strategies—while potentially resulting in care that deviates from usual standards–support the goal of maximising the aggregate benefit of scarce resources in crisis capacity settings triggered by staffing shortages. This ethical framework offers a foundation to support institutional leaders in developing operationalisable crisis capacity policies that promote fairness and support healthcare workers. (shrink)

Architectural style is a medium for the promotion of cultural identities and cohesion. South Asian Association for Regional Cooperation nations provide a prism through which all forms of vernacular architecture can be viewed. This study is presented through the lens of the soul of the eye coupled with the power of technological probing. This synthesis affords a most appealing and lyrical exploration of the course of the development of cities within the SAARC nations. It showcases research results combining the above (...) stated synergy—starting from some of SAARC’s sophisticated historic cultures, cultures that ebbed and flowed along its shores and valleys. This paper shall touch upon unique cultural roots stretching back to the Dravidian civilization that flourished over 3500 years ago and also look at the grouping of houses within the Indus Valley Civilization in Lothal and the Sarasvati Valley Civilization in Kalibangan. The sensitivity underlying SAARC architecture and its traditions are seen in many communal settlements, profoundly so in the Indian subcontinent and in Sri Lanka. The paper shall showcase two specific, but nevertheless, distinct styles of communal functioning within unique architectural strongholds in the ancient Ratnagiri University in Odisha, India, and also touch upon a unique blend of styles of landscape architecture in Sri Lanka. The overarching emphasis of this study is that throughout SAARC’s history, architecture has been creatively adopted to the need of its users and the characteristics of its climate and location. It has always fulfilled the needs and nourished the spirit of its people, promoting cultural cohesion even today. In this context, it is interesting to explore traditional techniques of vernacular architecture in houses in Andhra, Tamil Nadu and Kerala. The common thread linking mass housing in Lothal, Kalibangan, Anuradhapura and Ratnagiri about 2 millennia ago, with present day housing patterns, is in the application of sustainable building practices using intelligent building forms, fabric and orientation. This paper explores this commonality from a modern perspective using CFD. As the SAARC countries still struggle to get a fuller understanding of their unique ecology and the complexity of their diverse cultures, revisiting the architectural legacy of their indigenous societies might prove insightful. The need for this revisit becomes even more relevant in the wake of the Paris Agreement and more recently the Kigali Agreement. The discourse on providing indoor thermal comfort to the SAARC people cannot be decoupled from the climate change story—heating, ventilation and cooling consume a large amount of energy and have a deep underlying link with the targets set at Paris and Kigali. The onus will be on a large number of stakeholders to meet these targets—engineers, architects, manufacturers, policy-makers, researchers and consumers. This paper aims at reminding the stakeholders of the richness and the usefulness of their vernacular architecture in upholding the ideal of sustainability. (shrink)

It is a fundamental cornerstone of thermodynamics that entropy (SU,V\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$S_{U,V}$$\end{document}) increases in spontaneous processes in isolated systems (often called closed or thermally closed systems when the transfer of energy as work is considered to be negligible) and achieves a maximum when the system reaches equilibrium. But with a different sign convention entropy could just as well be said to decrease to a minimum in spontaneous constant U, V processes. It would (...) then change in the same direction as the thermodynamic potentials in spontaneous processes. This article discusses but does not advocate such a change. (shrink)

In this paper, we set out to develop a theoretical and conceptual framework for the new field of Radical Embodied Cognitive Neuroscience. This framework should be able to integrate insights from several relevant disciplines: theory on embodied cognition, ecological psychology, phenomenology, dynamical systems theory, and neurodynamics. We suggest that the main task of Radical Embodied Cognitive Neuroscience is to investigate the phenomenon of skilled intentionality from the perspective of the self-organization of the brain-body-environment system, while doing justice to the phenomenology (...) of skilled action. In previous work, we have characterized skilled intentionality as the organism's tendency toward an optimal grip on multiple relevant affordances simultaneously. Affordances are possibilities for action provided by the environment. In the first part of this paper, we introduce the notion of skilled intentionality and the phenomenon of responsiveness to a field of relevant affordances. Second, we use Friston's work on neurodynamics, but embed a very minimal version of his Free Energy Principle in the ecological niche of the animal. Thus amended, this principle is helpful for understanding the embeddedness of neurodynamics within the dynamics of the system “brain-body-landscape of affordances.” Next, we show how we can use this adjusted principle to understand the neurodynamics of selective openness to the environment: interacting action-readiness patterns at multiple timescales contribute to the organism's selective openness to relevant affordances. In the final part of the paper, we emphasize the important role of metastable dynamics in both the brain and the brain-body-environment system for adequate affordance-responsiveness. We exemplify our integrative approach by presenting research on the impact of Deep Brain Stimulation on affordance responsiveness of OCD patients. (shrink)

Achieving a comfortable thermal situation within buildings with an efficient use of energy remains still an open challenge for most buildings. In this regard, IoT (Internet of Things) and KDD (Knowledge Discovery in Databases) processes may be combined to address these problems, even though data analysts may feel overwhelmed by heterogeneity and volume of the data to be considered. Data analysts could benefit from an application assistant that supports them throughout the KDD process and aids them to discover which (...) are the relevant variables for the matter at hand, or informing about relationships among relevant data. In this article, the EEPSA (Energy Efficiency Prediction Semantic Assistant) ontology which supports such an assistant is presented. The ontology is developed on the basis that a proper axiomatization shapes the set of admitted models better, and therefore, establishes the ground for a better interoperability. On the contrary, underspecification facilitates the admission of non-isomorphic models to represent the same state which hampers interoperability. This ontology is developed on top of three ODPs (Ontology Design Patterns) which include proper axioms in order to improve precedent proposals to represent features of interest and their respective qualities, as well as observations and actuations, the sensors and actuators that generate them, and the procedures used. Moreover, the ontology introduces six domain ontology modules integrated with the ODPs in such a manner that a methodical customization is facilitated. (shrink)

A physical basis for the minimal time-energy uncertainty relation is formulated from basic high-energy hadronic properties such as the resonance mass spectrum, the form factor behavior, and the peculiarities of Feynman's parton picture. It is shown that the covariant oscillator formalism combines covariantly this time-energy uncertainty relation with Heisenberg's space-momentum uncertainty relation. A pictorial method is developed to describe the spacetime distribution of the localized probability density.

A thermal-mechanical analysis of the behavior of the segments of the rollers of the briquetting machines is carried out due to the effect of thermal shock and efforts exerted on the part. It is intended to obtain the main causes that generate this problem, through a mechanical analysis that simulated the behavior in the presence of several thermal gradients. The purpose of the study is to reduce maintenance costs and the continuous replacement and repair of segments, as (...) well as losses in tons of production due to the failure that are of great impact to the industry. This investigation allows us to know to what extent the operating parameters, such as: material temperature, pressure, torque, speed of the rollers influence the life of the segments according to their manufacturing material and based on these the behavior is simulated during the briquetting process. Keywords: Simulation, Finite element, Briquettes. [1]D. F. Pinzón, «Diseño óptimo de Sistemas de Distribución,» Universidad Nacional de Colombia, Bogotá, 2014. [2]F. A. Mendoza Lameda, «Diseño multiobjetivo y multietapa de sistemas de distribución de energía eléctrica aplicando algoritmos evolutivos,» Universidad de Zaragoza, Zaragoza, 2010. [3]L. Miró Hernández y R. Vizcón Toledo, «Sistema Hibrido Propuesto Para la Generación de Electricidad en un Policlínico,» Revista Avanzada Científica, vol. 9, nº 2, pp. 50-56, 2006. [4]J. Lagunas M., C. Ortega S. y P. Caratozzolo M., «Control supervisorio para sistemas híbridos de geración eléctrica basado en lógica difusa,» Boletin UE, Monterrey, 2005. [5]J. L. Bernal Agustín, «Aplicación de algoritmos genéticos al diseño óptimo de sistemas de distribución de energía eléctrica,» Universidad de Zaragoza, Zaragoza, 1998. [6]V. MIranda, J. V. Ranito y L. Proenca, «Genetic Algorithms in Optimal Multistage Distribution Network Planning, » IEEE, Porto, 1994. [7]I. Ramirez-Rosado y J. Dominguez-Navarro, «Computer Aided Desing of Power Distribution Systems: Multiobjective Mathematical Simulations» International Journal of Power and Energy Systems, vol. 19, nº 4, pp. 1801-1810, 2004. (shrink)

In this paper, we aim at smoothing two connected ball Bézier curves from Cr−1 to Cr r ≥ 1 by minimizing the energies of the curves. We propose the algorithms based on internal energy minimization and curve attractor minimization. Then, we combine the internal energy and the curve attractor and give the algorithm based on combined energy minimization. All algorithms are established by solving bi-objective minimizations. Some numerical examples show that the proposed algorithms are effective, making them useful for smoothing (...) 3D objects constructed by connected ball Bézier curves. (shrink)

This book reviews the spectrum of economic methods that have been developed from themid-1970s to the mid-1980s to analyze the feasibility of solar systems and shows how the use ofthese techniques has influenced federally sponsored research, development, and demonstrationprograms.

We consider an isolated, macroscopic quantum system. Let H be a microcanonical “energy shell,” i.e., a subspace of the system’s Hilbert space spanned by the (finitely) many energy eigenstates with energies between E and E + δE. The thermal equilibrium macro-state at energy E corresponds to a subspace Heq of H such that dim Heq/ dim H is close to 1. We say that a system with state vector ψ H is in thermal equilibrium if ψ is “close” (...) to Heq. We show that for “typical” Hamiltonians with given eigenvalues, all initial state vectors ψ0 evolve in such a way that ψt is in thermal equilibrium for most times t. This result is closely related to von Neumann’s quantum ergodic theorem of 1929. (shrink)

Protein α-helices provide an ordered biological environment that is conducive to soliton-assisted energy transport. The nonlinear interaction between amide I excitons and phonon deformations induced in the hydrogen-bonded lattice of peptide groups leads to self-trapping of the amide I energy, thereby creating a localized quasiparticle (soliton) that persists at zero temperature. The presence of thermal noise, however, could destabilize the protein soliton and dissipate its energy within a finite lifetime. In this work, we have computationally solved the system of (...) stochastic differential equations that govern the quantum dynamics of protein solitons at physiological temperature, T=310 K, for either a single isolated α-helix spine of hydrogen bonded peptide groups or the full protein α-helix comprised of three parallel α-helix spines. The simulated stochastic dynamics revealed that although the thermal noise is detrimental for the single isolated α-helix spine, the cooperative action of three amide I exciton quanta in the full protein α-helix ensures soliton lifetime of over 30 ps, during which the amide I energy could be transported along the entire extent of an 18-nm-long α-helix. Thus, macromolecular protein complexes, which are built up of protein α-helices could harness soliton-assisted energy transport at physiological temperature. Because the hydrolysis of a single adenosine triphosphate molecule is able to initiate three amide I exciton quanta, it is feasible that multiquantal protein solitons subserve a variety of specialized physiological functions in living systems. (shrink)

In 1916, Einstein rederived the blackbody radiation law of Planck that originated the idea of quantized energy one hundred years ago. For this purpose, Einstein introduced the concept of transition probability, which had a profound influence on the development of quantum theory. In this article, we adopt Einstein's assumptions with two exceptions and seek the statistical condition for the thermal equilibrium of matter without referring to the inner details of either statistical thermodynamics or quantum theory. It is shown that (...) the conditions of thermodynamic equilibrium of electromagnetic radiation and the energy balance of thermal radiation by the matter, between any of its two energy-states, not only result in Planck's radiation law and the Bohr frequency condition, but they remarkably yield the law of the statistical thermal equilibrium of matter: the Maxwell–Boltzmann distribution. Since the transition probabilities of the modern quantum theory of radiation coincide with their definition in Einstein's theory of blackbody radiation, the presented deduction of the Maxwell–Boltzmann distribution is equally valid within the bounds of modern quantum theory. Consequently, within the framework of the fundamental assumptions, the Maxwell–Boltzmann distribution of energy-states is not only a sufficient, but a necessary condition for thermal equilibrium between the matter and radiation. (shrink)

The prediction of protein–protein interactions based on independently obtained structural information for each interacting partner remains an important challenge in computational chemistry. Procedures where hypothetical interaction models (or decoys) are generated, then ranked using a biochemically relevant scoring function have been garnering interest as an avenue for addressing such challenges. The program PatchDock has been shown to produce reasonable decoys for modeling the association between pig alpha-amylase and the VH-domains of camelide antibody raised against it. We designed a biochemically relevant (...) method by which PatchDock decoys could be ranked in order to separate near-native structures from false positives. Several thousand steps of energy minimization were used to simulate induced fit within the otherwise rigid decoys and to rank them. We applied a partial free energy function to rank each of the binding modes, improving discrimination between near-native structures and false positives. Sorting decoys according to strain energy increased the proportion of near-native decoys near the bottom of the ranked list. Additionally, we propose a novel method which utilizes regression analysis for the selection of minimization convergence criteria and provides approximation of the partial free energy function as the number of algorithmic steps approaches infinity. (shrink)

The theoretical principles and methodological aspects of the thermal field-flow fractionation applied to study the thermal diffusion of the macromolecules in solution and colloidal particles in suspension were developed. The theoretical analysis indicated that the miniaturization of the separation channel for thermal field-flow fractionation should improve the performance of this technique. A new microchannel was conceived and built. The experimental results obtained for polymer samples with an extended range of molar masses from relatively low up to ultrahigh (...) and for the colloidal particles confirmed that the achieved resolution is the same but the versatility of the microchannel is superior to that of the standard size channels owing to the substantial decrease in the heat energy flux. This important improvement allows us to achieve very high resolution when applying constant-field-force operation, it makes it much easier to program the temperature drop which is an advantageous operational mode from the viewpoint of the time of analysis, and it extends considerably the range of perfectly controlled temperatures of the cold and hot walls. The sample amount needed for one analysis can be as small as a few nanograms. (shrink)

The two parameters of leaf dimension namely, length and width, show inverse correlation with the third parameter, the thickness. A thermal diffusion model is proposed which explains the inverse relationship between these and envisages that while leaf length and width are directly influenced by the microclimate the thickness is affected by the microclimate through endoclimate and energy balance in the leaves. The significance of the model is discussed in the light of its importance in assessing the survival range of (...) plant species along the altitudinal gradient. (shrink)

Based on a condensed historical overview of management as an artifact, the article argues that management is still suffused by an implicit paradigm of value extraction that is ideologically and culturally tinted and that we need to find a new foothold in theory and practice, a more universally valid approach with an encompassing awareness of societal well-being and long-term impact. The radically new approach proposed is based on free energy minimization, a concept from computational neuroscience, as a universally valid principle (...) derived from the biological imperative to survive that holds true for individuals and social systems alike. In order to reduce harmful free energy from entropy and stochastic adversity, an amplified way of perceiving and being aware of reality is required that needs to be cultivated. This is achieved through the guiding principle of Minding, an ongoing process of inner and outer awareness and caring consideration of oneself, others and the world around us, routed in a comprehensive consciousness including awareness of Body sensations, Emotions, Thoughts and Action impulses (BETA). This comprehensive, strategic awareness is proposed as a unifying, contextual framework for individual and collective well-being rather than a categorical imperative, and therefore may, when and where indispensable, include value extraction and value maximization if required for the overall objective of shared, long-term flourishing. The article also presents examples of implementation of the proposed approach for both individuals and organizations and briefly introduces MBSAT-Mindfulness-based Strategic Awareness Training, a training protocol designed specifically to enhance the competence of Minding, the guiding principle. (shrink)

The main concepts of the free energy (FE) neuroscience developed by Karl Friston and colleagues parallel those of Freud's Project for a Scientific Psychology. In Hobson et al. ( 2014 ) these include an innate virtual reality generator that produces the fictive prior beliefs that Freud described as the primary process. This enables Friston's account to encompass a unified treatment—a complexity theory—of the role of virtual reality in both dreaming and mental disorder. In both accounts the brain operates to minimize (...) FE aroused by sensory impingements—including interoceptive impingements that report compliance with biological imperatives—and constructs a representation/model of the causes of impingement that enables this minimization. In Friston's account (variational) FE equals complexity minus accuracy, and is minimized by increasing accuracy and decreasing complexity. Roughly the brain (or model) increases accuracy together with complexity in waking. This is mediated by consciousness-creating active inference—by which it explains sensory impingements in terms of perceptual experiences of their causes. In sleep it reduces complexity by processes that include both synaptic pruning and consciousness/virtual reality/dreaming in REM. The consciousness-creating active inference that effects complexity-reduction in REM dreaming must operate on FE-arousing data distinct from sensory impingement. The most relevant source is remembered arousals of emotion, both recent and remote, as processed in SWS and REM on “active systems” accounts of memory consolidation/reconsolidation. Freud describes these remembered arousals as condensed in the dreamwork for use in the conscious contents of dreams, and similar condensation can be seen in symptoms. Complexity partly reflects emotional conflict and trauma. This indicates that dreams and symptoms are both produced to reduce complexity in the form of potentially adverse (traumatic or conflicting) arousals of amygdala-related emotions. Mental disorder is thus caused by computational complexity together with mechanisms like synaptic pruning that have evolved for complexity-reduction; and important features of disorder can be understood in these terms. Details of the consilience among Freudian, systems consolidation, and complexity-reduction accounts appear clearly in the analysis of a single fragment of a dream, indicating also how complexity reduction proceeds by a process resembling Bayesian model selection. (shrink)

It is shown that the time operatorQ 0 appearing in the realization of the RCCR's [Qμ,Pv]=−jhgμv, on Minkowski quantum spacetime is a self adjoint operator on Hilbert space of square integrable functions over Σ m =σ×v m , where σ is a timelike hyperplane. This result leads to time-energy uncertainty relations that match their space-momentum counterparts. The operators Qμ appearing in Born's metric operator in quantum spacetime emerge as internal spacetime operators for exciton states, and the condition that the metric (...) operator should possess a ground exciton state assumes the significance of achieving minimal spacetime4-momentum uncertainty in fundamental standards for spacetime measurements. (shrink)

Non-therapeutic ventilation of potential organ donors would increase the supply of kidneys for transplantation. There are no major ethical objections to it. The means of permitting it are forbidden by laws with an ethical basis. A law permitting it would need an ethical basis. Introducing a third legal method of diagnosing death would be unethical. Expanding the power of the advance directive to permit procedures involving minimal harm would be ethical but not helpful. Extending the power of proxies to (...) permit specific non-therapeutic procedures which caused or risked minimal harm to incompetent patients is the best way forward. (shrink)

The standards of energy and environmental design are improving day by day, are flexible enough, and in continuous change. The designers are the first ones which introduce the inputs into the system in order to improve it. The overall city should be planned as a socio-natural hybrid system. The LEED program has been developed in the US since 1998. It has been adopted in almost 40 countries and it is widely used by public. The LEED standards are based on reducing (...) overall impact rather than on a specific issue or topic, trying to be green as much as possible. The reliance to outside sources (programs and standards) is also important in order to enlarge the expertise area and the variety of subjects. The green city should be well planned and well documented since the early stage of design, reducing the costs and synchronizing the work of different systems that operates within the building. The LEED standards involve the environmental, economic, and social impact, regardless at this point the standards are socially neutral. The city planned according to LEED standards is a socio-neutral hybrid one. On the other hand, BREEAM is established since 1990 in the UK and certifies the sustainability of buildings. For each environmental certification, there exist differences between various criteria related to building energy efficiency. The evaluation of the performance improvement over specified baseline requirements is the common point of the two building standards. The sustainable assessments such as BREEAM or LEED can be applied or adopted in any region of the world. The Albanian case does not adopt any of them. Based on EPC (energy performance certificate), the building is considered to be in compliance with the minimum performance requirements of energy, aiming to achieve optimal levels of energy consumption for a typical use of the building. The building is considered as zero energy building when the ratio of the total energy consumption of the current building per sqm of the surface is equal or be less than 50% and the ratio of renewable energy produced in the building during a year compared to the consumption of total energy of the current building for one sqm of the surface. Expressed as a percentage is equal to or greater than 50%. (shrink)

Low‐energy, pulsed electromagnetic fields (PEMFs) have reversed therapeutically resistant pathologic processes in the musculo‐skeletal system. Their development as a non‐thermal therapeutic agent is based on 30 years of study of the electro‐biological properties of connective tissues. Specific energy characteristics in applied PEMFs produce selected biological effects by modifying synthetic and other behavioral patterns of target cells; some mechanisms of action are defined. The technology appears safe and effective in clinical treatment of un‐united fractures, avascular necrosis of bone, and chronic, (...) refractory tendinitis. An expanding, rational use in biomedical science is predicted. (shrink)

This first part, compiled from a catalogue of documents whose chronology has been reconsidered, is devoted to roofs of marble and limestone. The second part, on terra-cotta roofs, will appear in the Actes du Colloque "Constructions publiques et programmes édilitaires du II s. av. au Ier s. ap. J.-C. "Athènes, EFA, mai 1995. The principal traditions survive until the beginning of the empire, and the tendencies that had already begun to appear in the 3rd c. (disappearance of the cyma reversa (...) and vegetal acroteria with multiple stems) are confirmed. The innovations, revivals (relief anthemia on sloping simas) or creations (antefixes) are common enough, but sporadic. In general, uniformity is allied to restraint, and roof decoration undergoes fewer transformations than do other parts of the buildings. The reign of Augustus is marked by some manifestations of classicism, either strict (Gate of Athena Archegetis) or eclectic (cyma scrolls), and by the restrained accession of Roman influences and models, more visible in the colony of Corinth (Captives' Façade, Babbius Monument) than at Athens. The iconographie symbols are distinct (Lycosoura and Babbius Monument acroteria); the decorative programmes are diluted in the tradition which they reinforce (Athens), or derive from an imported repertoire, but are not numerous (Corinth). (shrink)

The energy transport in one-dimensional nonlinear systems is discussed. By numerically studying a model system, we verify the Fourier heat law on purely dynamical grounds and we compute the coefficient of thermal conductivity K. The same value ofK is independently obtained by use of the Green-Kubo formalism.

Differential scanning calorimetry (DSC) has been employed to investigate the glass transition activation energy E g, thermal stability and glass-forming ability (GFA) of Se90In10− x Sb x (x = 0, 2, 4, 6, 8, 10) chalcogenide glasses. DSC runs were performed at six different heating rates. Well-defined endothermic and exothermic peaks were obtained at glass transition and crystallization temperature. The dependence of glass transition temperature T g on heating rate (α), as well as composition of Sb, has been studied. (...) From the dependence of glass transition temperature on heating rate, the E g has been calculated on the basis of the Kissinger [Anal. Chem. 29 (1957) p.1702] and Moynihan [J. Phys. Chem. 78 (1974) p.267] models. Thermal stability has been monitored through the calculation of temperature differences T c–T g, the stability parameter S, and the enthalpy released during crystallization H c. The GFA has been investigated on the basis of the Hruby parameter H r, which is strong indicator of GFA. Results for GFA are in good agreement with fragility index F i calculations, indicating that Se90In6Sb4 is an excellent glass-former. (shrink)