The need to design and build according to the resident’s demands is the best possible option, in today's economic market. Nowadays, buildings that ensure a good thermal performance is increasing. This article compares the thermal transmittance coefficient (U-value) between a wall with a simple composition of bricks, plaster and graffito without thermal insulation and a wall composed of stone wool, anti-vapors membrane, air gap and terracotta tiles (ventilated façade). This comparison explains the thermal benefits and the (...) best ways to increase the thermal performance of a building, in a particular case of Polis University, Tirana, Albania. The results and conclusions drawn from this article are factual indicators with concrete values that professionals should take into consideration since in the initial stage of design. Choosing the best layers for a façade may result in the creation of a comfortable indoor thermal comfort for the inhabitance in a micro perspective. A good thermal insulation improves the building’s thermal balance and contributes decisively to the thermal comfort of the occupants, which means a considerable reduction in heating and cooling loads, in order to increase the building’s energy efficiency. The measurements of this comparative analysis will be done by using a specific instrument such as Testo 435-2. Atmospheric conditions will also be considered during the measurements, respectively for internal and external environments. (shrink)

The climate change problem must be thought of in terms of risk, not certainty. There are many well-established elements of the problem that carry considerable confidence whereas some aspects are speculative. Therefore, the climate problem emerges not simply as a normal science research issue, but as a risk management policy debate as well. Descriptive science entails using empirical and theoretical methods to quantify the two factors that go into risk assessment: “What can happen?” and “What are the odds?” (Probability (...) x Consequences). Policymakers should, in turn, take that information and use it to make value judgments about what is safe, what is dangerous, what is fair. To make these judgments, policymakers need to know the probabilities that experts assign to various possible outcomes in order to make risk management decisions to hedge against unsafe, dangerous and unfair outcomes. The climate debate needs to be reframed away from absolute costs—or benefits—into relative delay times to achieve specific caps or to avoid crossing specific agreed “dangerous” climate change thresholds. Even in most optimistic scenarios, CO2 will stabilize at a much higher concentration than it has reached today, and temperature will rise accordingly. It will take even longer for sea level rise from thermal expansion and the melting of polar ice to occur, but what is most problematic is that how we handle our emissions now and in the next five decades preconditions the sustainability of the next millennium. (shrink)

Precision livestock farming (PLF) is the management of livestock using the principles and technology of process engineering. Key to PLF is the dense monitoring of variegated parameters, including animal growth, output of produce (e.g. milk, eggs), diseases, animal behaviour, and the physical environment (e.g. thermal micro-environment, ammonia emissions). While its proponents consider PLF a win-win strategy that combines production efficiency with sustainability goals and animal welfare, critics emphasise, inter alia, the potential interruption of human-animal relationships. This paper discusses (...) the notion that the objectification of animals by PLF influences the developmental pathways of conventional industrial farming. We conduct a conceptual analysis of objectification by comparing discussions in feminist ethics and animal ethics. We find that in animal ethics, objectification includes deontological arguments regarding instrumentalisation, de-animalisation, alienation, commodification and quantification of animals. The focus on socio-political context and relationality connects these debates to central ideas in care ethics. We adopt a care ethics perspective to assess the implications of the objectification of animals in livestock farming. The basic claim is that sensory knowledge symbolised by the farmers’ unity of hand, head and heart would make it harder to objectify animals than abstract and instrumental reasoning where the pursuit of knowledge is intertwined with the pursuit of control, as in mainstream PLF. Despite of what can be considered as a good caring relationship between farmers and animals that is mediated by PLF, people involved in conventional industrial farming still seem to become further detached from farmers and animals, because the PLF system itself is objectifying. PLF redefines the notion of care, in terms of data transparency, standardisation of methods for analysis, real-time collection and processing of data, remote control, and the use of digital platforms. This creates new expectations and requires a redistribution of responsibilities within a wider scope of relations in the value chain. (shrink)

The paper reviews the basics of development and implementation of the debt policy of Ukraine, outlines its formation principles and establishes requirements to normative legal documents which specify administrative measures in the field of the public debt. The research conducted shows that the main normative legal documents which govern activities of state administration bodies responsible for the debt policy implementation are the State Budget and the Program for State Debt Management of the Ministry of Finance of Ukraine. An analysis (...) of the structure of the above documents and ensuing governmental regulations of Ukraine indicates that the national debt policy is not a separate link of the public financial administration, it is shaped subsequent to the results of managerial decisions in the field of monetary relations, changes in the taxation system, operation of the efficiency control system of national taxes, the government deficit level, impacts of foreign economic factors etc. It is proved that debt operations in Ukraine are becoming a factor of economic risk for the state budget whereas the debt budget itself is becoming a destabilization factor. The budgetary policy of Ukraine, which is primarily aimed at maximization of tax collection, results in distortion of the public finance system and aggravates the economic status of numerous industries. The public debt service expenses are however still increasing and require public borrowings which keep growing year by year. The author indicates that the most unsuccessful decisions of the national leadership, which brought about a higher public debt, are the issue of internal public bonds for capitalization of the Privatbank PJSC in 2017 and poor state control over quasi-fiscal operations which may result in default of national Compulsory Social Insurance Funds on their obligations, accumulation of debts on VAT refund, remission of dead tax debts, instalment payment and deferral of money liabilities or tax debts of taxpayers, attraction of sovereign credits by resident economic entities, debt restructuring of such entities with public guarantees, supply of natural gas to heat-and-power engineering companies for generation of thermal energy at preferential prices, accrued receivables of the National Joint-Stock Company 'Naftogaz Ukrainy' for sale of natural gas to the population and heat-and-power engineering companies. (shrink)

As part of a larger study eliciting Canadian producer and non-producer views about animal welfare, open-ended, semi-structured interviews were used to explore opinions about animal welfare of 20 Canadian pig producers, most of whom were involved in confinement-based systems. With the exception of the one organic producer, who emphasized the importance of a “natural” life, participants attached overriding importance to biological health and functioning. They saw their efforts as providing pigs with dry, thermally regulated, indoor environments where animals received abundant (...) feed, careful monitoring and where prospective disease outbreaks could be minimized and controlled. Emphasis was also placed on low-stress handling and agreeable working conditions which were believed to promote good animal care. The fact that pigs tend to respond to such conditions with steady growth reinforced the belief that good welfare was provided. Participants supported the use of sow gestation stalls, but with some reservations, and expressed concern about welfare problems that could occur if sows were grouped. Invasive procedures (castration, tail-docking, teeth clipping) were recognized as painful but were accepted because they were seen as: (1) necessary for sales or management; (2) satisfactory trade-offs to prevent worse welfare problems such as injury or infection; or (3) sufficiently short-term to be relatively unimportant. Participants were adamantly opposed to animal neglect and some welcomed actions of animal protectionists that expose poor care. Producers also welcomed natural-science-based approaches to improving animal welfare. The findings contribute to a broader effort to identify overlapping values among different stakeholder groups as a basis for formulating mutually agreeable, farm animal care and handling polices. (shrink)

If we are to ensure the persistence of species in an increasingly warm world, of interest is the identification of drivers that affect the ability of an organism to resist thermal stress. Underpinning any organism's capacity for resistance is a complex interplay between biological and physical factors occurring over multiple scales. Tropical coral reefs are a unique system, in that their function is dependent upon the maintenance of a coral–algal symbiosis that is directly disrupted by increases in water temperature. (...) A number of physical factors have been identified as affecting the biological responses of the coral organism under broadscale thermal anomalies. One such factor is water flow, which is capable of modulating both organismal metabolic functioning and thermal environments. Understanding the physiological and hydrodynamic drivers of organism response to thermal stress improves predictive capabilities and informs targeted management responses, thereby increasing the resilience of reefs into the future. (shrink)

Following the outbreak of what would become the COVID-19 pandemic, social distancing measures were quickly introduced across East Asia—including drastic shelter-in-place orders in some cities—drawing on experience with the outbreak of severe acute respiratory syndrome almost two decades ago. “Smart City” technologies and other digital tools were quickly deployed for infection control purposes, ranging from conventional thermal scanning cameras to digital tracing in the surveillance of at-risk individuals. Chatbots endowed with artificial intelligence have also been deployed to shift part (...) of healthcare provision away from hospitals and to support a number of programmes for self-management of chronic disease in the community. With the closure of schools and adults working from home, digital technologies have also sustained many aspects of both professional and social life at a pace and scale not considered to be practicable before the outbreak. This paper considers how these new experiences with digital technologies in public health surveillance are spurring digitalization in East Asian societies beyond the conventional public health context. It also considers some of the concerns and challenges that are likely to arise with rapid digitalization, particularly in healthcare. (shrink)

In the process of rapid urbanization, urban heat island effect has been showing more and more significant impacts on human well-being. Therefore, a more detailed understanding of the impact of three-dimensional building morphology on UHI effect across a continuum of spatial scales will be necessary to guide and improve the human settlement.This study selected 31 provincial capital cities of mainland China to analyze the impacts of the 3D building morphology, including the number, area, height, volume, and the surface area of (...) the buildings, on the land surface temperature. By exploring how the influence of 3D building morphology on LST changes with the increase of spatial scale, this study finally recognized which 3D building morphology index is the most significant index affecting LST in different cities, and which spatial scale these 3D building morphology indexes have the most significant impact on LST. The results showed that the building area is the most important 3D building morphology parameter affecting the LST, while the building height has the slightest influence on the LST. These effects are more significant in the spatial scale of 150 m–540 m, and the spatial scale increases with the increase of building areas in developed cities. These results highlight the necessity of considering fine-grained management in the governance and alleviating of the urban thermal environment through urban planning and urban renewal strategies. (shrink)

The bioclimatic architecture is still fascinating to all of us. The lack of energy that the world is facing nowadays is forcing architects and engineers to implement smart solutions benefiting at the maximum from nature itself without considering the primary sources of energy that the world is actually using. Bioclimatic design has the roots in history, despite the fact that little attention has been paid to it throughout history. It is important to understand how natural systems operates, creating closed or (...) semi-closed systems that mirror the ecological systems on Earth. The components of bioclimatic design deal mostly with: climate type and requirements; adaptive thermal comfort; vernacular and contextual solutions; tools and assessment methods; microclimate; sun path; wind; rain; passive and active systems and responsive forms. The aim of the bioclimatic design is to improve the natural environment through the utilization of clean energy and renewable energy system; to reduce the need for energy for heating purposes; and to reduce the energy for cooling proposes, air conditioning and lighting. Furthermore, bioclimatic design involves changes in regulation, improves the house comfort, and also improves urban quality of life. Bioclimatic buildings also include the use of building elements such as walls, windows, roofs, and floors, in order to collect, store, and distribute solar thermal energy and to prevent overheating. The aim is to manage the energy flows providing comfortable conditions during the entire year and the entire day. Minimization of thermal losses and utilization of climatic conditions (climate; microclimate, sunrise) are other important issues to consider. According to many studies, the best orientation for a building in order to maximize the heat gain during winter is east–west and the primary façade should face south. Sustainability is mostly an outcome, rather than a goal or a process. The aim of all designers is to reduce the ecological footprints and to improve the quality of life. The energy sustainability and the use of natural resources must be an integral part of a sustainable development. Nowadays, there are softwares that are developed in order to carry out environmental assessment tools and standards, in order to draw conclusions about internal thermal comfort; uncomfortable times in the building during the entire year; the need for shading devices and their dimensions; energy use, energy cost, etc. Simulations are essential in the design process. Examples chosen as case studies participate to have a better insight into the overall approach of the bioclimatic design. Applying the principles of bioclimatic design remains still a challenge in redefining the perfect bioclimatic house. (shrink)

The paper addresses a problem for the unification of quantum physics with the new Aristotelianism: the identification of the members of the category of substance. I outline briefly the role that substance plays in Aristotelian metaphysics, leading to the postulating of the Tiling Constraint. I then turn to the question of which entities in quantum physics can qualify as Aristotelian substances. I offer an answer: the theory of thermal substances, and I construct a fivefold case for thermal substances, (...) based on the irreversibility of time, the definition of thermodynamic concepts, spontaneous symmetry breaking, phase transitions, and chemical form. (shrink)

Touch is standardly taken to be a proximal sense, principally constituted by capacities to detect proximal pressure and thermal stimulation, and contrasted with the distal senses of vision and audition. It has, however, recently been argued that the scope of touch extends beyond proximal perception; touch can connect us to distal objects. Hence touch generally should be thought of as a connection sense. In this paper, I argue that whereas pressure perception is a connection sense, thermal perception is (...) not. Thermal perception is a proximal sense distinct from touch. One significant consequence of this is that it motivates an alternative explanation of how we detect the thermal properties of the things we touch and what they are. (shrink)

Preparing general relativity for quantization in the Hamiltonian approach leads to the `problem of time,' rendering the world fundamentally timeless. One proposed solution is the `thermal time hypothesis,' which defines time in terms of states representing systems in thermal equilibrium. On this view, time is supposed to emerge thermodynamically even in a fundamentally timeless context. Here, I develop the worry that the thermal time hypothesis requires dynamics -- and hence time -- to get off the ground, thereby (...) running into worries of circularity. (shrink)

Many countries in Eastern Europe, during the 1960–1970s, as well as Albania responded to the growing demand for new houses utilizing the emerging trends for industrialization of the construction process and mass construction of prefabricated residential buildings based on large-panel prefabricated RC elements. During the 1970s large-panel buildings spread throughout the country and became the main type of construction in the Albanian cities such as Shkodër, Tirana, Durrës, Elbasan, Berat, etc. Most of these buildings have five or six stories and (...) comprise different modules, the number of which depends on the urban and architectonic projects. The construction technology of these types of buildings included only the construction of prefabricated reinforced concrete material and did not take into account the energy performance of these structures. Since the moment of construction, only in the last year, several interventions have been made in different cities where a layer of polystyrene has been placed on the external walls of these buildings in order to enhance their thermal insulation. The aim of this paper is to improve the thermal performance of these buildings by introducing a comparison of their initial situation as they are today and how their performance would be if innovative technologies and materials were applied. The study is going to analyse the thermal performance of the existing buildings, by means of the thermal camera in the city of Kamez, located in Tirana, which has been chosen as a key study. Furthermore, the data obtained from the MEEC application are gathered, in order to compare the previous, the existing situation and the proposed intervention. The results may be used by municipalities of different cities, not only in the Albanian context, either where interventions have been made to improve their performance, or for municipalities where thermal regulation policies have not been yet implemented for these types of buildings. The existing situation of the buildings according to the calculations, showed a poor thermal performance, regardless of the fact that they are already equipped with thermal insulation building envelope. They have to be requalified in order to be categorized as a building with high thermal performance. (shrink)

Albania is part of the emerging economies of the Western Balkan region. Polis University is one of the pioneering institutions in the field of architecture, built environment, and city sciences that represents innovative methodologies and concepts for educational and scientific purposes. Nowadays, many constructions in Albania involve a wide range of different materials. The building envelope is one of the main elements that provide protection from the outside environment but also the required thermal comfort for the inhabitants. The necessary (...) balance must be archived between energy efficiency and the durability of buildings. This paper will focus on the thermal performance and materials composition of two different types of masonry walls, a constituent part of Polis University's main building. The study will be based on an experiment using specific instruments to diagnose these typologies of wall composition. The results are further analyzed and compared. Specific instruments such as the thermal camera (Testo 882), U-value(Testo 435-2), and “Silverline Digital Moisture Meter” (from POLIS Energy lab) are engaged. The collected data are further interpreted through graphs, tables, and diagrams for both cases. It is observed that ventilated facades perform much better than standard facades, therefore their usage is strongly recommended. (shrink)

Volume 30, Issue 2, March 2025, Page 242-244.

Literature shows that psychological phenomena, including values, personality, and behaviors, are geographically clustered. The effects of temperature on interpersonal and intergroup aggression have been studied by many social psychologists. To date the interactions between temperature and other geographical factors have not been addressed. This study is aiming to examine the effects of thermal demands and the moderating effects of natural geographical factors on aggressive behavior at national level. Data for 156 societies was obtained from publicly available databases. Consistent with (...) the life-history theory, results of this study showed that aggressive behavior has a positive relationship with heat demands, and a negative relationship with cold demands. Aggressive behavior is also positively correlated with sunlight and altitude, and negatively correlated with coastline vicinity. Forest, coastline vicinity, and rainfall moderated the effect of thermal demands on aggressive behavior. In societies with more forests, with more rainfall, and closer to coastline, the negative effects of cold demands on aggressive behavior are stronger. (shrink)

The theoretical principles and methodological aspects of the thermal field-flow fractionation applied to study the thermal diffusion of the macromolecules in solution and colloidal particles in suspension were developed. The theoretical analysis indicated that the miniaturization of the separation channel for thermal field-flow fractionation should improve the performance of this technique. A new microchannel was conceived and built. The experimental results obtained for polymer samples with an extended range of molar masses from relatively low up to ultrahigh (...) and for the colloidal particles confirmed that the achieved resolution is the same but the versatility of the microchannel is superior to that of the standard size channels owing to the substantial decrease in the heat energy flux. This important improvement allows us to achieve very high resolution when applying constant-field-force operation, it makes it much easier to program the temperature drop which is an advantageous operational mode from the viewpoint of the time of analysis, and it extends considerably the range of perfectly controlled temperatures of the cold and hot walls. The sample amount needed for one analysis can be as small as a few nanograms. (shrink)

The two parameters of leaf dimension namely, length and width, show inverse correlation with the third parameter, the thickness. A thermal diffusion model is proposed which explains the inverse relationship between these and envisages that while leaf length and width are directly influenced by the microclimate the thickness is affected by the microclimate through endoclimate and energy balance in the leaves. The significance of the model is discussed in the light of its importance in assessing the survival range of (...) plant species along the altitudinal gradient. (shrink)

We consider an isolated, macroscopic quantum system. Let H be a microcanonical “energy shell,” i.e., a subspace of the system’s Hilbert space spanned by the (finitely) many energy eigenstates with energies between E and E + δE. The thermal equilibrium macro-state at energy E corresponds to a subspace Heq of H such that dim Heq/ dim H is close to 1. We say that a system with state vector ψ H is in thermal equilibrium if ψ is “close” (...) to Heq. We show that for “typical” Hamiltonians with given eigenvalues, all initial state vectors ψ0 evolve in such a way that ψt is in thermal equilibrium for most times t. This result is closely related to von Neumann’s quantum ergodic theorem of 1929. (shrink)

In this paper I will defend the incapacity of the informational frameworks in thermal physics, mainly those that historically and conceptually derive from the work of Brillouin (1962) and Jaynes (1957a), to robustly explain the approach of certain gaseous systems to their state of thermal equilibrium from the dynamics of their molecular components. I will further argue that, since their various interpretative, conceptual and technical-formal resources (e.g. epistemic interpretations of probabilities and entropy measures, identification of thermal entropy (...) as Shannon information, and so on) are shown to be somehow incoherent, inconsistent or inaccurate, these informational proposals need to 'epistemically parasitize' the manifold of theoretical resources of Boltzmann's and Gibbs' statistical mechanics, respectively, in order to properly account for the equilibration process of an ideal gas from its microscopic properties. Finally, our conclusion leads us to adopt a sort of constructive skepticism regarding the explanatory value of the main informationalist trends in statistical thermophysics. (shrink)

Differential scanning calorimetry (DSC) has been employed to investigate the glass transition activation energy E g, thermal stability and glass-forming ability (GFA) of Se90In10− x Sb x (x = 0, 2, 4, 6, 8, 10) chalcogenide glasses. DSC runs were performed at six different heating rates. Well-defined endothermic and exothermic peaks were obtained at glass transition and crystallization temperature. The dependence of glass transition temperature T g on heating rate (α), as well as composition of Sb, has been studied. (...) From the dependence of glass transition temperature on heating rate, the E g has been calculated on the basis of the Kissinger [Anal. Chem. 29 (1957) p.1702] and Moynihan [J. Phys. Chem. 78 (1974) p.267] models. Thermal stability has been monitored through the calculation of temperature differences T c–T g, the stability parameter S, and the enthalpy released during crystallization H c. The GFA has been investigated on the basis of the Hruby parameter H r, which is strong indicator of GFA. Results for GFA are in good agreement with fragility index F i calculations, indicating that Se90In6Sb4 is an excellent glass-former. (shrink)

Thermal insulation is an important component in nowadays construction. Considering that before 90s Albania had been undeveloped enough, there was no needed information for thermal insulation’s importance, as well as missing materials and economic hardships to provide them. Consequently, many objects built during this time are not thermal insulated. Nowadays, its application is being more and more significant and convenient due to its benefits. In our country, a lot of attention has been paid to the application of (...) thermal insulation, since 1990s. The main reason is the energy efficiency. Energy consumption is directly affected by its preservation. Moreover, it is crucial to mention the comfort that is offered. To give solutions to these housing challenges, is important to find the appropriate materials. During the latest years, more and more materials are highly standardized in contemporary expectations. One of these materials that is widely used in thermal insulation is expanded polystyrene. The benefits that the material has in terms of insulation, durability, moister resistance, and energy efficiency are important. In construction, insulation continues to function under a variety of temperature, humidity, and other conditions. The impact of expanded polystyrene in thermal insulation of buildings is the main subject of the study. This study should take in consideration the thermal insulation (EPS) applied in a building in the city of Tirana and another building where there is no application of thermal insulation. A comparative analyse between them should be applied by using a specific instrument, which calculate the U-value taking in consideration all layers of the wall and three components of temperature: indoor temperature, wall temperature and outer temperature. (shrink)