Advances in prosthetic design should benefit people with limb difference. But empirical evidence demonstrates a lack of uptake of prosthetics among those with limb difference, including of advanced designs. Non-use is often framed as a problem of prosthetic design or a user’s response to prosthetics. Few studies investigate user experience and preferences, and those that do tend to address satisfaction or dissatisfaction with functional aspects of particular designs. This results in limited data to improve designs and, (...) we argue, this is pragmatically and ethically problematic. This paper presents results of a survey we conducted in 2017 with people with upper limb difference in Australia. The survey sought to further knowledge about preferences surrounding prosthetics and understanding of how preferences relate to user experience, perspective, and context. Survey responses demonstrated variety in the uptake, use and type of prosthetic—and that use of, preferences about, and impacts of prosthetics rely not just on design factors but on various contextual factors bearing on identity and social understandings of disability and prosthetic use. From these results, we argue that non-use of prosthetics could be usefully reframed as an issue of understanding how prosthetics can best support users’ autonomy. This supports the claim that there is a need to incorporate user engagement into design processes for prosthetic limbs, though further work is needed on methods for doing so. (shrink)

Advances in prosthetic design should benefit people with limb difference. But empirical evidence demonstrates a lack of uptake of prosthetics among those with limb difference, including of advanced designs. Non-use is often framed as a problem of prosthetic design or a user’s response to prosthetics. Few studies investigate user experience and preferences, and those that do tend to address satisfaction or dissatisfaction with functional aspects of particular designs. This results in limited data to improve designs and, (...) we argue, this is pragmatically and ethically problematic. This paper presents results of a survey we conducted in 2017 with people with upper limb difference in Australia. The survey sought to further knowledge about preferences surrounding prosthetics and understanding of how preferences relate to user experience, perspective, and context. Survey responses demonstrated variety in the uptake, use and type of prosthetic—and that use of, preferences about, and impacts of prosthetics rely not just on design factors but on various contextual factors bearing on identity and social understandings of disability and prosthetic use. From these results, we argue that non-use of prosthetics could be usefully reframed as an issue of understanding how prosthetics can best support users’ autonomy. This supports the claim that there is a need to incorporate user engagement into design processes for prosthetic limbs, though further work is needed on methods for doing so. (shrink)

The free and open source software (Foss) movement deserves to be placed in an historico-ethical perspective that emphasizes the end user. Such an emphasis is able to enhance and support the Foss movement by arguing the ways it is heir to a tradition of professional ethical idealism and potentially related to important issues in the history of science, technology, and society relations. The focus on software from an end-user’s perspective also leads to the concept of program conviviality. From (...) a non-technical perspective, however, software is simply a new example of technology, and the effort to assure that technology is developed in a socially responsible manner has a significant history. The argument thus begins with observations about the history of technology. This leads to critical reflections on the development of professional engineering ethics, and to a discussion of the alternative technology movement. Finally, it concludes by indicating some criteria to consider when imagining the design of convivial software. (shrink)

Multistability—the plurality of meanings of technological artifacts—is an emancipatory phenomenon insofar as it allows the user to freely appropriate the object according to his or her interests, even against the will of the designer. The objective of this article is to show how the trend to connect physical and digital artifacts to the Internet poses a danger to the freedom that there is in multistability. By reducing the traditional separation between the artifact and the designer, the connection of the (...) artifact to the Internet allows the designer to continually modify the software that governs or constitutes it, which involves a relative loss of power for the user to determine its meaning. This change, in favor of the designer in the correlation of power among the actors—designer, artifact, and user—from whose interplay the meaning of artifacts arises, favors concentric stabilities and hinders eccentric ones with respect to the will of the designer. Thus, we should rethink the truth value of the designer fallacy, that is, the claim that the meaning of artifacts is determined only by the designer. From a political point of view, the remote control of artifacts and their multistability is an effective pedagogical tool to educate human beings in a time in which texts, according to Sloterdijk, no longer serve this function. (shrink)

Starting from the observation that data sharing in general and sharing of reusable behavioral data in particular is still scarce in psychology, we set out to develop a curation standard for behavioral psychological research data rendering data reuse more effective and efficient. Specifically, we propose a standard that is oriented toward the requirements of the psychological research process, thus considering the needs of researchers in their role as data providers and data users. To this end, we suggest that researchers should (...) describe their data on three documentation levels reflecting researchers’ central decisions during the research process. In particular, these levels describe researchers’ decisions on the concrete research design that is most suitable to address the corresponding research question, its operationalization as well as a precise description of the subsequent data collection and analysis process. Accordingly, the first documentation level represents, for instance, researchers’ decision on the concrete hypotheses, inclusion/exclusion criteria and the number of measurement points as well as a conceptual presentation of all substantial variables included in the design. On the second level these substantial variables are presented within an extended codebook allowing for the linkage between the conceptual research design and the actually operationalized variables as presented within the data. Finally, the third level includes all materials, data preparation and analyses scripts as well as a detailed procedure graphic that allows the data user to link the information from all three documentation levels at a single glance. After a comprehensive presentation of the standard, we will offer some arguments for its integration into the psychological research process. (shrink)

BackgroundImplementation science research, especially when using participatory and co-design approaches, raises unique challenges for research ethics committees. Such challenges may be poorly addressed by approval and governance mechanisms that were developed for more traditional research approaches such as randomised controlled trials.DiscussionImplementation science commonly involves the partnership of researchers and stakeholders, attempting to understand and encourage uptake of completed or piloted research. A co-creation approach involves collaboration between researchers and end users from the onset, in question framing, research design (...) and delivery, and influencing strategy, with implementation and broader dissemination strategies part of its design from gestation. A defining feature of co-creation is its emergent and adaptive nature, making detailed pre-specification of interventions and outcome measures impossible. This methodology sits oddly with ethics committee protocols that require precise pre-definition of interventions, mode of delivery, outcome measurements, and the role of study participants. But the strict requirements of ethics committees were developed for a purpose – to protect participants from harm and help ensure the rigour and transparency of studies. We propose some guiding principles to help square this circle. First, ethics committees should acknowledge and celebrate the diversity of research approaches, both formally and informally ; without active support, their members may not understand or value participatory designs. Second, ground rules should be established for co-design applications and communicated to committee members and stakeholders. Third, the benefits of power-sharing should be recognised and credit given to measures likely to support this important goal, especially in research with vulnerable communities. Co-design is considered best practice, for example, in research involving indigenous peoples in New Zealand, Australia and Canada. (shrink)

End user participation in design is widely believed to benefit system development. In 1992, when the U.S. National Research Council advocated broadening research in computer science, it strongly recommended collaborative projects in which the user/ application discipline was an equal partner with computer science. This article exam ines the incentives and costs in user-designer relationships and argues that the costs to users are unexpected and often not assumable and that there are asymmetries inherent in the (...) class='Hi'>user-designer relationship that destabilize the collaboration. The article draws on a case study of Sequoia 2000, a multimillion dollar collaboration between computerscien tists and global change researchers. (shrink)

John Thackara emphasised that 80% of the negative impact on the natural environment has its origin in design and the randomness of its application. Considering the entirety of design practices, one would have a hard time disputing this. In contemporary times, design understood as design practices has assumed a servile role in relation to big corporations. One can observe the consequences of such practices in real time: social exclusion, the lack of design consideration or consideration (...) of end users, the failure of branding, and the polarisation of entire societies – these are only some dimensions of the current applications of design. Instead of the current applications, we need a change in the paradigm of both the theory of design and practical applications. Design needs a new code of application which would not only look good in social media, but would also be a clear point of reference in the design practice. (shrink)

In Information Systems development, resilience has often been treated as a non-functional requirement and little or no work is aimed at building resilience in end-users through systems development. The question of how values and resilience (for the end-user) can be incorporated into the design of systems is an on-going research activity in user-centered design. In this paper we evaluate the relation of values and resilience within the context of an ongoing software development project and contribute a (...) formal model of co-design based on a significant extension of Abstract Design Theory. The formal analysis provides a full and clear-cut definition of the co-design space, its objectives and processes. On the basis of both, we provide an abstract definition of resilient system (for the end-user). We conclude that value-sensitive co-design enforces better resilience in end-users. (shrink)

BackgroundDespite the recognition that developing artificial intelligence (AI) that is trustworthy is necessary for public acceptability and the successful implementation of AI in healthcare contexts, perspectives from key stakeholders are often absent from discourse on the ethical design, development, and deployment of AI. This study explores the perspectives of birth parents and mothers on the introduction of AI-based cardiotocography (CTG) in the context of intrapartum care, focusing on issues pertaining to trust and trustworthiness.MethodsSeventeen semi-structured interviews were conducted with birth (...) parents and mothers based on a speculative case study. Interviewees were based in England and were pregnant and/or had given birth in the last two years. Thematic analysis was used to analyze transcribed interviews with the use of NVivo. Major recurring themes acted as the basis for identifying the values most important to this population group for evaluating the trustworthiness of AI.ResultsThree themes pertaining to the perceived trustworthiness of AI emerged from interviews: (1) trustworthy AI-developing institutions, (2) trustworthy data from which AI is built, and (3) trustworthy decisions made with the assistance of AI. We found that birth parents and mothers trusted public institutions over private companies to develop AI, that they evaluated the trustworthiness of data by how representative it is of all population groups, and that they perceived trustworthy decisions as being mediated by humans even when supported by AI.ConclusionsThe ethical values that underscore birth parents and mothers’ perceptions of trustworthy AI include fairness and reliability, as well as practices like patient-centered care, the promotion of publicly funded healthcare, holistic care, and personalized medicine. Ultimately, these are also the ethical values that people want to protect in the healthcare system. Therefore, trustworthy AI is best understood not as a list of design features but in relation to how it undermines or promotes the ethical values that matter most to its end users. An ethical commitment to these values when creating AI in healthcare contexts opens up new challenges and possibilities for the design and deployment of AI. (shrink)

This paper deals with various aspects of the development of data systems for engineering materials. The problem considered here is the difference between the end-users' mental model of materials, which focuses on performance, and the concepts of properties of materials held by materials specialists. Previous treatises on this problem have elaborated on systems aspects in general, emphasising incompatibilities in the relationship mentioned and the means of overcoming these incompatibilities by service management. Another perspective applied has been the historical one, combined (...) with experience of traditional views on science and technology. The present paper pursues this general path by discussing the problem in terms of visions, illusions and myths. These phenomena are thought to be both inevitable in this context and necessary in any attempt to understand the dilemma of data systems for engineering materials. It is believed that the views of the different parties involved are to a great extent steered by visions, illusions and myths, examples of which are discussed. Furthermore, it is suggested that these phenomena have roots in, or are expressions of, paradigms and values related to world pictures. Admittedly eclectic, this discussion leads to the conclusion that a solution to the dilemma in question cannot be found within computer science, materials technology and design theory only. Guidance has to be sought in philosophy and theory of science as well as in literature and the arts. In order to make it possible to implement ideas arrived at by such means, practitioners of psychology will probably have to be consulted. (shrink)

Monitoring and assistive technologies (MATs) are being used more frequently in healthcare. A central ethical concern is the compatibility of these systems with the moral preferences of their users—an issue especially relevant to participatory approaches within the ethics-by-design debate. However, users’ incapacity to communicate preferences or to participate in design processes, e.g., due to dementia, presents a hurdle for participatory ethics-by-design approaches. In this paper, we explore the question of how the value preferences of users in the (...) field of dementia care can be integrated into AI-based MATs. First, we briefly introduce different ethics-by-design approaches and explain the challenges they face in dementia care. Next, we introduce a novel approach for addressing these challenges. Through a qualitative content analysis of interviews with persons with dementia and their family caregivers (n = 27), we identified multiple ideal–typical value preference profiles. We then applied these profiles in a computer simulation, by which we also introduce the concept of ethical compliance quantification to scale the moral preferences of the interviewees for the simulation. Finally, we discuss study results, the advantages of using computer simulations, and general study limitations before drawing conclusions for further research. The study contributes to the ongoing debate on participatory ethics-by-design by defining on the basis of empirical data ideal–typical value preference frameworks that can be used to guide MAT actions and their outcomes. Going forward, MAT end-users with dementia and other communication-impaired persons could be enabled to choose a value profile that best fits their moral preferences. (shrink)

Providing meaningful and actionable explanations for end-users is a situated problem requiring the intersection of multiple disciplines to address social, operational, and technical challenges. However, the explainable artificial intelligence community has not commonly adopted or created tangible design tools that allow interdisciplinary work to develop reliable AI-powered solutions. This paper proposes a formative architecture that defines the explanation space from a user-inspired perspective. The architecture comprises five intertwined components to outline explanation requirements for a task: (1) the end-users’ (...) mental models, (2) the end-users’ cognitive process, (3) the user interface, (4) the Human-Explainer Agent, and (5) the agent process. We first define each component of the architecture. Then, we present the Abstracted Explanation Space, a modeling tool that aggregates the architecture’s components to support designers in systematically aligning explanations with end-users’ work practices, needs, and goals. It guides the specifications of what needs to be explained (content: end-users’ mental model), why this explanation is necessary (context: end-users’ cognitive process), to delimit how to explain it (format: Human-Explainer Agent and user interface), and when the explanations should be given. We then exemplify the tool’s use in an ongoing case study in the aircraft maintenance domain. Finally, we discuss possible contributions of the tool, known limitations or areas for improvement, and future work to be done. (shrink)

This article suggests several design principles intended to assist in the development of ethical algorithms exemplified by the task of fighting fake news. Although numerous algorithmic solutions have been proposed, fake news still remains a wicked socio-technical problem that begs not only engineering but also ethical considerations. We suggest employing insights from ethics of care while maintaining its speculative stance to ask how algorithms and design processes would be different if they generated care and fight fake news. After (...) reviewing the major characteristics of ethics of care and the phases of care, we offer four algorithmic design principles. The first principle highlights the need to develop a strategy to deal with fake news on the part of the software designers. The second principle calls for the involvement of various stakeholders in the design processes in order to increase the chances of successfully fighting fake news. The third principle suggests allowing end-users to report on fake news. Finally, the last principle proposes keeping the end-user updated on the treatment in the suspected news items. Implementing these principles as care practices can render the developmental process more ethically oriented as well as improve the ability to fight fake news. (shrink)

100 years after creating the Federal Reserve System (FED), whose legality and modus operandi remains questionable, there is time to rethink the national and also international payment system as a whole. The key element of existing economic relationships is the money that makes barter-free exchange possible. But monetary economics is only one aspect of more common political framework designed and established for retention of power. Such egoistic political interest proves its own relevancy and exerts ideological pressure on economic thought that (...) consequently forms economic and political institutions. In an effort to breake a rule, and to end the circuit of capitalistic self-fullfilling prophecy, a different economic model based on joint ownership (userization) is taken into consideration. This manuscript gives explanatory statements on userization and substantiates its advantageous social and environmental appropriateness. (shrink)

This paper introduces the design principle of legibility as means to examine the epistemic and ethical conditions of sensing technologies. Emerging sensing technologies create new possibilities regarding what to measure, as well as how to analyze, interpret, and communicate said measurements. In doing so, they create ethical challenges for designers to navigate, specifically how the interpretation and communication of complex data affect moral values such as autonomy. Contemporary sensing technologies require layers of mediation and exposition to render what they (...) sense as intelligible and constructive to the end user, which is a value-laden design act. Legibility is positioned as both an evaluative lens and a design criterion, making it complimentary to existing frameworks such as value sensitive design. To concretize the notion of legibility, and understand how it could be utilized in both evaluative and anticipatory contexts, the case study of a vest embedded with sensors and an accompanying app for patients with chronic obstructive pulmonary disease is analyzed. (shrink)

While often presented as promising assistive technologies for motor-impaired users, electroencephalography (EEG)-based Brain-Computer Interfaces (BCIs) remain barely used outside laboratories due to low reliability in real-life conditions. There is thus a need to design long-term reliable BCIs that can be used outside-of-the-lab by end-users, e.g., severely motor-impaired ones. Therefore, we propose and evaluate the design of a multi-class Mental Task (MT)-based BCI for longitudinal training (20 sessions over 3 months) of a tetraplegic user for the CYBATHLON BCI (...) series 2019. In this BCI championship, tetraplegic pilots are mentally driving a virtual car in a racing video game. We aimed at combining a progressive user MT-BCI training with a newly designed machine learning pipeline based on adaptive Riemannian classifiers shown to be promising for real-life applications. We followed a two step training process: the first 11 sessions served to train the user to control a 2-class MT-BCI by performing either two cognitive tasks (REST and MENTAL SUBTRACTION) or two motor-imagery tasks (LEFT-HAND and RIGHT-HAND). The second training step (9 remaining sessions) applied an adaptive, session-independent Riemannian classifier that combined all 4 MT classes used before. Moreover, as our Riemannian classifier was incrementally updated in an unsupervised way it would capture both within and between-session non-stationarity. Experimental evidences confirm the effectiveness of this approach. Namely, the classification accuracy improved by about 30% at the end of the training compared to initial sessions. We also studied the neural correlates of this performance improvement. Using a newly proposed BCI user learning metric, we could show our user learned to improve his BCI control by producing EEG signals matching increasingly more the BCI classifier training data distribution, rather than by improving his EEG class discrimination. However, the resulting improvement was effective only on synchronous (cue-based) BCI and it did not translate into improved CYBATHLON BCI game performances. For the sake of overcoming this in the future, we unveil possible reasons for these limited gaming performances and identify a number of promising future research directions. Importantly, we also report on the evolution of the user's neurophysiological patterns and user experience throughout the BCI training and competition. (shrink)

BackgroundThis manuscript presents a framework to guide the identification and assessment of ethical opportunities and challenges associated with electronic patient records (EPR). The framework is intended to support designers, software engineers, health service managers, and end-users to realise a responsible, robust and reliable EPR-enabled healthcare system that delivers safe, quality assured, value conscious care.MethodsDevelopment of the EPR applied ethics framework was preceded by a scoping review which mapped the literature related to the ethics of EPR technology. The underlying assumption behind (...) the framework presented in this manuscript is that ethical values can inform all stages of the EPR-lifecycle from design, through development, implementation, and practical application.ResultsThe framework is divided into two parts: context and core functions. The first part ‘context’ entails clarifying: the purpose(s) within which the EPR exists or will exist; the interested parties and their relationships; and the regulatory, codes of professional conduct and organisational policy frame of reference. Understanding the context is required before addressing the second part of the framework which focuses on EPR ‘core functions’ of data collection, data access, and digitally-enabled healthcare.ConclusionsThe primary objective of the EPR Applied Ethics Framework is to help identify and create value and benefits rather than to merely prevent risks. It should therefore be used to steer an EPR project to success rather than be seen as a set of inhibitory rules. The framework is adaptable to a wide range of EPR categories and can cater for new and evolving EPR-enabled healthcare priorities. It is therefore an iterative tool that should be revisited as new EPR-related state-of-affairs, capabilities or activities emerge. (shrink)

Technological development and increased international competition have imposed a significant burden on the product development function of many companies. The growing complexity of products demands a larger product development team with people having various competencies. Simultaneously the importance of good quality, usability and customisation of products is growing, and many companies want to involve customers and users directly in the development work. Both the complexity and quality demand new ways of working that support collaboration between people with various competencies, interests (...) and responsibilities both inside and outside the company. This paper reports experiences from using action research to introduce new user-centred work practices in two commercial product development projects. The interventions varied. In the first project it was found rewarding to engage customers and users in workshops based on participatory inquiry and collaborative design. The design process was iterative and the workshops took place several times involving concept through detailed design. In the second project, new design representations are introduced. The experiences highlight the importance of creating and reifying insights in design representations and using these to both support collaboration, and create continuity in the project. The paper ends with a discussion of scientific rigor in action research and what the new work practices imply for the development team. (shrink)

Ship design needs to respond to and attract an ever more design conscious society. However, little research has been conducted into perceptions of beauty and pleasure and how such perceptions can be usefully absorbed into ship design. Aesthetic consideration, is seen as a distraction from the bespoke nature of the ship design process and is often avoided, second guessed or left for external consultancy. The ship design discipline requires the nurturing of its own aesthetic methods, (...) for future development, and to adapt some of the aesthetic ideals found in architecture, art and design. This paper argues that philosophy can be effective in interpreting what the passenger finds attractive and pleasurable. To illustrate the philosophical approach proposed, the `Elbe SWATH’ and the `Oasis of the Seas’ are investigated and compared using theoretical resources from the culturally focused philosophy of `Functional Beauty’. Conclusions suggest that the interpretation of the end users most valued appreciations can lead to design directives that deliver subjective qualities of beauty - beauty similar to those seen in the pure aims of the Elbe SWATH’s purposeful work craft, or comparable to nature’s beauty and purity in aim. (shrink)

Information and communications technology (ICT) is now used more by non-IT professional end-users than by IT professionals. A survey of 125 London-based organisations found that the majority had instituted codes of conduct designed to govern the use of ICT by their employees. However, the primary purpose of adopting such codes was to ensure the security and efficient operation of the organisation's information systems rather than for wider ethical considerations. Hence, few of the codes of conduct addressed issues relating to the (...) collection, storage and dissemination of data about individuals (personal data); this was especially the case with codes emanating from IT departments rather than senior management. In general, codes of conduct were found to be ineffective in influencing end-user behaviour in the organisations surveyed. Codes of conduct are a means by which organisations seek to exercise power, control and ownership, but their effectiveness is compromised by the nature of ICT itself as well as the attitudes of employees. The failure of well-publicised ethical policies to influence use of ICT by business studies students – the managers of tomorrow – suggests that these tensions are likely to remain unresolved. (shrink)

The concept of Smart Healthy Age-Friendly Environments (SHAFE) emphasises the comprehensive person-centred experience as essential to promoting living environments. SHAFE takes an interdisciplinary approach, conceptualising complete and multidisciplinary solutions for an inclusive society. From this approach, we promote participation, health, and well-being experiences by finding the best possible combinations of social, physical, and digital solutions in the community. This initiative emerged bottom-up in Europe from the dream and conviction that innovation can improve health equity, foster caring communities, and sustainable development. (...) Smart, adaptable, and inclusive solutions can promote and support independence and autonomy throughout the lifespan, regardless of age, gender, disabilities, cultural differences, and personal choices, as well as promote happier and fairer living places. The New European Bauhaus initiative gathers “beautiful, sustainable, and inclusive projects and ideas” to inspire a positive transformation around us. The New European Bauhaus 2024 Festival took place between 9-13 April. “Designing the perfect New European Bauhaus neighbourhood: New European Bauhaus meets SHAFE” was a Satellite Event of the Festival, held as an online workshop, organised by the SHAFE Foundation on April 9th, 2024. At the event, a group of 50 participants with a multidisciplinary background discussed how to meet the challenges of the European Garcia family to enable them to live in a perfect neighbourhood. The White Paper presents the findings of the participants with the New European Bauhaus inspiring projects and ideas to house the European Garcia family in their neighbourhood. The White Paper recommends developers, designers, planners, and policymakers to include person-centred design of social and physical environments and technologies. Although awareness of person-centred design is growing, many initiatives still hamper the inclusion of citizens or end-users throughout the development of products and services. (shrink)

“Privacy as confidentiality” has been the dominant paradigm in computer science privacy research. Privacy Enhancing Technologies (PETs) that guarantee confidentiality of personal data or anonymous communication have resulted from such research. The objective of this paper is to show that such PETs are indispensable but are short of being the privacy solutions they sometimes claim to be given current day circumstances. Using perspectives from surveillance studies we will argue that the computer scientists’ conception of privacy through data or communication confidentiality (...) is techno-centric and displaces end-user perspectives and needs in surveillance societies. We will further show that the perspectives from surveillance studies also demand a critical review for their human-centric conception of information systems. Last, we rethink the position of PETs in a surveillance society and argue for the necessity of multiple paradigms for addressing privacy concerns in information systems design. (shrink)

Participatory design amalgamates the expertise of interdisciplinary specialists with the taskspecific expertise of end-users. Groupware design is widely recognised as benefiting from participative approaches. Recognition of this ideal, however, does not preclude the failure of groupware design due to poor communication and inadequate understanding between participants. We provide a grounding in the problems affecting groupware success, and introduce four design principles that guide all those involved in design around the pitfalls that have been encountered, some (...) repeatedly, by groupware. (shrink)

Developers and designers make all sorts of moral decisions throughout an innovation project. In this article, we describe how teams of developers and designers engaged with ethics in the early phases of innovation based on case studies in the SUBCOP project. For that purpose, Value Sensitive Design will be used as a reference. Specifically, we focus on the following two research questions: How can researchers/developers learn about users’ perspectives and values during the innovation process? and How can researchers/developers take (...) into account these values, and related design criteria, in their decision-making during the innovation process? Based on a case study of several innovation processes in this project, we conclude the researchers/developers involved are able to do something similar to VSD, supported by relatively simple exercises in the project, e.g., meetings with potential end-users and discussions with members of the Ethical Advisory Board of the project. Furthermore, we also found—possibly somewhat counterintuitively—that a commercial, with its focus on understanding and satisfying customers’ needs, can promote VSD. (shrink)

The illicit diffusion of intimate photographs or videos intended for private use is a troubling phenomenon known as the diffusion of Non-Consensual Intimate Images (NCII). Recently, it has been feared that the spread of deepfake technology, which allows users to fabricate fake intimate images or videos that are indistinguishable from genuine ones, may dramatically extend the scope of NCII. In the present essay, we counter this pessimistic view, arguing for qualified optimism instead. We hypothesize that the growing diffusion of deepfakes (...) will end up disrupting the status that makes our visual experience of photographic images and videos epistemically and affectively special; and that once divested of this status, NCII will lose much of their allure in the eye of the perpetrators, probably resulting in diminished diffusion. We conclude by offering some caveats and drawing some implications to better understand, and ultimately better counter, this phenomenon. (shrink)

Databases play a fundamental role in today’s world, being used by most companies, especially those that offer services through the Internet. Today there is a wide variety of database models, each adapted for use according to the specific requirements of each application. Traditionally, the relational models with centralized architectures have been used mostly due to their simplicity and general-purpose query language, which made relational systems suitable for almost any application. However, with the growth of the Internet in recent decades, both (...) in the number of users and in the amount of information, those centralized models began to suffer availability and scalability issues. To address those issues, the use of decentralized architectures and alternative database models began to arise, eventually replacing relational databases and centralized architectures when the requirements on availability and scalability are high. Those database models alternative to the traditional relational model are grouped under the name of NoSQL. In this article, we present a NoSQL database developed as an end of degree work, with a flexible data model based on documents and a fully decentralized architecture based on the Gossip protocol for node discovery and a distributed hash table, in particular the rendezvous hashing algorithm, used to distribute and replicate the data across all the nodes. The main goals of the system are to achieve high availability and high scalability. High availability is achieved thanks to the replication of the data, while high scalability is achieved by its decentralized architecture, which allows multiple entry points from the requests, and the data distribution, effectively increasing the database capacity by increasing the number of nodes. (shrink)

In lieu of an abstract, here is a brief excerpt of the content:Commentary on “Towards a Design-Based Analysis of Emotional Episodes”Cristiano Castelfranchi (bio) and Maria Miceli (bio)Keywordsgrief, suffering, attachment, agent architectureThis paper is significant in many respects: its approach (the design-based analysis); its proposed architecture; its description of grief; and its self-control/perturbance theory. We would offer some remarks on each of these aspects.AI: Back to the FutureAfter some years of crisis, AI seems now to have recovered its original (...) challenging attitude and its identity. In particular all the original ambitions of AI have been renewed under the label of “autonomous agents” (see, for example, Russell and Norvig 1995; Wooldridge and Jennings 1995). This paper and its authors are good representatives of this challenging attitude. Of course, the AI appearing at century’s end is different from, say, the AI of the 1980s. AI systems and models are now conceived for reasoning and acting in open unpredictable worlds, with limited and uncertain knowledge, in real time, with bounded (both cognitive and material) resources, with hybrid architectures, interfering—either co-operatively or competitively—with other systems. The new password for the AI of the 1990s is interaction (Bobrow 1991): interaction with an evolving environment; among several, distributed and heterogeneous artificial systems in a network; with human users; and among humans through computers.This renewed AI, however different though it is in some ways, can be understood as returning to its original aim of modeling “intelligence”: not only static and isolated sub-functions of intelligence but the integrated and pragmatic functioning of autonomous agent architectures as against algorithms. Our renewed AI, based on architectures, can again have important exchanges with other (psychological and social) sciences. This paper is a good example of the fruitful cross-fertilization of ideas which may result from such exchanges. It was indeed just this which originally gave rise to cognitive science.The ArchitectureThe proposed architecture, although quite speculative, and—as the authors themselves emphasize—very much a first sketch, is directly relevant to this new AI. In fact, recent research efforts in the agent-architecture domain are focused exactly on the problem of “goal dynamics” [End Page 129] or “motive processing,” which is the core of this architecture, and on the problem of integrating reactivity and deliberation. Compared with current AI architectures (for example, BDI systems) it is important to note that this “motive-processing” architecture is not yet formalized or implemented to the same extent. On the other hand, it is more interesting from a psychological point of view, and is already able to give us some important insights into human emotions, in particular those emotions (like grief) that involve all or total loss of control of management processes.The Report-Based Analysis of GriefThe report-based description of grief provides a persuasive and rich basis for both modeling and discussing the model. The relevant features of this emotion are well characterized with reference to the self-control problem and motive-processing (though, as we shall see, to use grief as an example of those emotions that involve all or total loss of control of thought processes may provide a partially distorted view of grief itself). In particular, we would stress the relevance of the “intrusive” character of grief-related contents; the rejection of certain beliefs due to the psychic pain they cause; the coping strategies people describe; and the second order motivations related to the control of the emotional state. We believe that psychological models especially of these aspects are usually less specific and explanatory.Let us now try to synthesize some criticisms one could advance of this analysis. We will first address two core notions of the model—perturbance and self-control—and then consider more specifically the treatment of grief.PerturbanceThis notion is potentially very interesting, unless it is reduced to an information processing perspective (e.g., perturbance of attentive processes). An information processing perspective is much more limited than a motive-processing one—at least in the limitative sense of the term, as it is generally used in the psychology of cognitive processes—and is in our view insufficient for understanding human emotions and their role. This limiting interpretation of perturbance fails... (shrink)

When infrastructural technology is functioning correctly, it is often considered to recede from view and become invisible. According to this perspective, visibility is restored in cases of breakdown and malfunction, which for this reason, are often understood to represent important epistemic opportunities for grasping previously hidden aspects of infrastructure. This article seeks to outline the limitations of the idea that infrastructural failure has a positive epistemic function by distinguishing between two fundamentally different ways in which the nature of technological function (...) can be conceptualised; the first understands function as stemming primarily from the way a technology was designed and produced, the second as a process sustained by constant human activities of maintenance and repair. After illustrating how a number of recent studies of infrastructure build upon insights granted by the latter process perspective, this article aims to demonstrate how the experience of breakdown itself does little to facilitate a shift towards understanding infrastructure in this way. For this reason, this article ends with a suggestion for a shift in emphasis in studies of infrastructure, away from breakdown and towards a sustained examination of everyday practices of maintenance, repair and modification of infrastructural technologies. (shrink)

Purpose– There are two claims made by the web marketing/advertising industry. By collecting, managing, and mining data, companies serve consumer's best interests, and by adopting sophisticated analytics, web marketers avoid discriminations that disserve individuals. Although the paper shares an interest in ending social discrimination, the paper is more circumspect about pronounced individualism and technological fixes. Despite its appeal, or perhaps because of it, the paper should not accept the claim at face value. The paper argues that social discrimination may not (...) disappear under smarter marketing; more overt forms may wane only to be replaced by more subtle forms. The paper aims to discuss these issues.Design/methodology/approach– The paper compares the two most important techniques of “smarter” marketing – predictive analytics and Facebook's social graph – with current discriminatory practices of weblining and e-scoring. While noting advances against overt discrimination, the paper describes how smarter marketing allows for covert forms.Findings– Innovative strategies to record and mine users' tastes and social connectivity for marketing purposes open the way for covert social discrimination.Originality/value– The paper provides a critical assessment of two claims made by the web marketing/advertising industry: by monitoring consumer web activity and collecting, managing, and mining data, companies serve consumer's best interests, and by adopting sophisticated analytics, web marketers avoid discriminations that disserve individuals. (shrink)

The growing capabilities of artificial intelligence (AI) word processing models have demonstrated exceptional potential to impact language related tasks and functions. Their fast pace of adoption and probable effect has also given rise to controversy within certain fields. Models, such as GPT-3, are a particular concern for professionals engaged in writing, particularly as their engagement with these technologies is limited due to lack of ability to control their output. Most efforts to maximize and control output rely on a process known (...) as prompt engineering, the construction and modification of the inputted prompt with expectation for certain outputted or desired text. Consequently, prompt engineering has emerged as an important consideration for research and practice. Previous conceptions of prompt engineering have largely focused on technical and logistic modifications to the back-end processing, remaining inaccessible and, still, limited for most users. In this paper, we look to the technical communication field and its methods of text generation—the rhetorical situation—to conceptualize prompt engineering in a more comprehensible way for its users by considering the context and rhetoric. We introduce a framework, consisting of a formula, to prompt engineering, which demands all components of the rhetorical situation be present in the inputted prompt. We present discussions on the future of AI writing models and their use in both professional and educational settings. Ultimately, this discussion and its findings aim to provide a means of integrating agency and writer-centric methods to AI writing tools to advance a more human-in-the-loop approach. As the use of generative AI and especially NLP-based technologies become common across societal functions, the use of prompt engineering will play a crucial role not just in adoption of the technology, but also its productive and responsible use. (shrink)

In the product-design domain, metaphors are used as a means of communication between designers and users. A designer generates a metaphor by deciding on a quality of a target to highlight and selecting a corresponding source that conveys this quality; the user interprets the designer’s intentions via the end product. The depth of the generated metaphor can be assessed by the extent to which the highlighted quality is salient for the target: Metaphors focusing on a salient quality of (...) the target are termed “surface” metaphors, whereas those focusing on a non-salient quality are called “deep” metaphors. In this article, we investigated both the effect of the expertise level of the designer and different types of intention on metaphor depth, through a study in which groups of expert and novice designers were asked to generate metaphors and external judges evaluated the depth of the metaphors created. Results indicated that having a pragmatic intention.. (shrink)

It is a matter of fact that Europe is facing more and more crucial challenges regarding health and social care due to the demographic change and the current economic context. The recent COVID-19 pandemic has stressed this situation even further, thus highlighting the need for taking action. Active and Assisted Living technologies come as a viable approach to help facing these challenges, thanks to the high potential they have in enabling remote care and support. Broadly speaking, AAL can be referred (...) to as the use of innovative and advanced Information and Communication Technologies to create supportive, inclusive and empowering applications and environments that enable older, impaired or frail people to live independently and stay active longer in society. AAL capitalizes on the growing pervasiveness and effectiveness of sensing and computing facilities to supply the persons in need with smart assistance, by responding to their necessities of autonomy, independence, comfort, security and safety. The application scenarios addressed by AAL are complex, due to the inherent heterogeneity of the end-user population, their living arrangements, and their physical conditions or impairment. Despite aiming at diverse goals, AAL systems should share some common characteristics. They are designed to provide support in daily life in an invisible, unobtrusive and user-friendly manner. Moreover, they are conceived to be intelligent, to be able to learn and adapt to the requirements and requests of the assisted people, and to synchronise with their specific needs. Nevertheless, to ensure the uptake of AAL in society, potential users must be willing to use AAL applications and to integrate them in their daily environments and lives. In this respect, video- and audio-based AAL applications have several advantages, in terms of unobtrusiveness and information richness. Indeed, cameras and microphones are far less obtrusive with respect to the hindrance other wearable sensors may cause to one’s activities. In addition, a single camera placed in a room can record most of the activities performed in the room, thus replacing many other non-visual sensors. Currently, video-based applications are effective in recognising and monitoring the activities, the movements, and the overall conditions of the assisted individuals as well as to assess their vital parameters. Similarly, audio sensors have the potential to become one of the most important modalities for interaction with AAL systems, as they can have a large range of sensing, do not require physical presence at a particular location and are physically intangible. Moreover, relevant information about individuals’ activities and health status can derive from processing audio signals. Nevertheless, as the other side of the coin, cameras and microphones are often perceived as the most intrusive technologies from the viewpoint of the privacy of the monitored individuals. This is due to the richness of the information these technologies convey and the intimate setting where they may be deployed. Solutions able to ensure privacy preservation by context and by design, as well as to ensure high legal and ethical standards are in high demand. After the review of the current state of play and the discussion in GoodBrother, we may claim that the first solutions in this direction are starting to appear in the literature. A multidisciplinary debate among experts and stakeholders is paving the way towards AAL ensuring ergonomics, usability, acceptance and privacy preservation. The DIANA, PAAL, and VisuAAL projects are examples of this fresh approach. This report provides the reader with a review of the most recent advances in audio- and video-based monitoring technologies for AAL. It has been drafted as a collective effort of WG3 to supply an introduction to AAL, its evolution over time and its main functional and technological underpinnings. In this respect, the report contributes to the field with the outline of a new generation of ethical-aware AAL technologies and a proposal for a novel comprehensive taxonomy of AAL systems and applications. Moreover, the report allows non-technical readers to gather an overview of the main components of an AAL system and how these function and interact with the end-users. The report illustrates the state of the art of the most successful AAL applications and functions based on audio and video data, namely lifelogging and self-monitoring, remote monitoring of vital signs, emotional state recognition, food intake monitoring, activity and behaviour recognition, activity and personal assistance, gesture recognition, fall detection and prevention, mobility assessment and frailty recognition, and cognitive and motor rehabilitation. For these application scenarios, the report illustrates the state of play in terms of scientific advances, available products and research project. The open challenges are also highlighted. The report ends with an overview of the challenges, the hindrances and the opportunities posed by the uptake in real world settings of AAL technologies. In this respect, the report illustrates the current procedural and technological approaches to cope with acceptability, usability and trust in the AAL technology, by surveying strategies and approaches to co-design, to privacy preservation in video and audio data, to transparency and explainability in data processing, and to data transmission and communication. User acceptance and ethical considerations are also debated. Finally, the potentials coming from the silver economy are overviewed. (shrink)

BackgroundExisting clinical ethics support (CES) instruments are considered useful. However, users report obstacles in using them in daily practice. Including end users and other stakeholders in developing CES instruments might help to overcome these limitations. This study describes the development process of a new ethics support instrument called CURA, a low-threshold four-step instrument focused on nurses and nurse assistants working in palliative care. MethodWe used a participatory development design. We worked together with stakeholders in a Community of Practice throughout (...) the study. Potential end users (nurses and nurse assistants in palliative care) used CURA in several pilots and provided us with feedback which we used to improve CURA.ResultsWe distinguished three phases in the development process. Phase one, Identifying Needs, focused on identifying stakeholder and end user needs and preferences, learning from existing CES instruments, their development and evaluation, and identify gaps. Phase two, Development, focused on designing, developing, refining and tailoring the instrument on the basis of iterative co-creation. Phase three, Dissemination, focused on implementation and dissemination. The instrument, CURA, is a four-step low-threshold instrument that fosters ethical reflection.ConclusionsParticipatory development is a valuable approach for developing clinical ethics support instruments. Collaborating with end users and other stakeholders in our development study has helped to meet the needs and preferences of end users, to come up with strategies to refine the instrument in order to enhance its feasibility, and to overcome reported limitations of existing clinical ethics instruments. (shrink)

There is a current debate about if, and in what sense, machine learning systems used in the medical context need to be explainable. Those arguing in favor contend these systems require post hoc explanations for each individual decision to increase trust and ensure accurate diagnoses. Those arguing against suggest the high accuracy and reliability of the systems is sufficient for providing epistemic justified beliefs without the need for explaining each individual decision. But, as we show, both solutions have limitations—and it (...) is unclear either address the epistemic worries of the medical professionals using these systems. We argue these systems do require an explanation, but an institutional explanation. These types of explanations provide the reasons why the medical professional should rely on the system in practice—that is, they focus on trying to address the epistemic concerns of those using the system in specific contexts and specific occasions. But ensuring that these institutional explanations are fit for purpose means ensuring the institutions designing and deploying these systems are transparent about the assumptions baked into the system. This requires coordination with experts and end-users concerning how it will function in the field, the metrics used to evaluate its accuracy, and the procedures for auditing the system to prevent biases and failures from going unaddressed. We contend this broader explanation is necessary for either post hoc explanations or accuracy scores to be epistemically meaningful to the medical professional, making it possible for them to rely on these systems as effective and useful tools in their practices. (shrink)

Smart-home technologies, comprising environmental sensors, wearables and video are attracting interest in home healthcare delivery. Development of such technology is usually justified on the basis of the technology’s potential to increase the autonomy of people living with long-term conditions. Studies of the ethics of smart-homes raise concerns about privacy, consent, social isolation and equity of access. Few studies have investigated the ethical perspectives of smart-home engineers themselves. By exploring the views of engineering researchers in a large smart-home project, we sought (...) to contribute to dialogue between ethics and the engineering community. Either face-to-face or using Skype, we conducted in-depth qualitative interviews with 20 early- and mid-career smart-home researchers from a multi-centre smart-home project, who were asked to describe their own experience and to reflect more broadly about ethical considerations that relate to smart-home design. With participants’ consent, interviews were audio-recorded, transcribed and analysed using a thematic approach. Two overarching themes emerged: in ‘Privacy’, researchers indicated that they paid close attention to negative consequences of potential unauthorised information sharing in their current work. However, when discussing broader issues in smart-home design beyond the confines of their immediate project, researchers considered physical privacy to a lesser extent, even though physical privacy may manifest in emotive concerns about being watched or monitored. In ‘Choice’, researchers indicated they often saw provision of choice to end-users as a solution to ethical dilemmas. While researchers indicated that choices of end-users may need to be restricted for technological reasons, ethical standpoints that restrict choice were usually assumed and embedded in design. The tractability of informational privacy may explain the greater attention that is paid to it. However, concerns about physical privacy may reduce acceptability of smart-home technologies to future end-users. While attention to choice suggests links with privacy, this may misidentify the sources of privacy and risk unjustly burdening end-users with problems that they cannot resolve. Separating considerations of choice and privacy may result in more satisfactory treatment of both. Finally, through our engagement with researchers as participants this study demonstrates the relevance of ethics as a critical partner to smart-home engineering. (shrink)

The growth of Sweden’s urban population necessitates new approaches for increasing the sustainability and energy efficiency of multifamily buildings. The development of such approaches will require a holistic and integrated understanding of the factors driving the decision making of both professionals who design buildings and end-users who live in them. This paper, therefore, uses the goal framing theory to determine which aspects of multifamily buildings are considered important by these two groups of actors. An empirical study based on semi-structured (...) interviews with professionals involved in building design and development was conducted to identify goals affecting the choices made during building design and development. In parallel, a questionnaire survey of building end-users was conducted to determine which factors guided their choice of dwelling. It was found that professionals’ design choices were primarily governed by normative goals relating to environmental benefits but were also influenced by the other goals. These included gain goals relating to budgetary constraints and keeping the building’s operational and maintenance costs low. Hedonic goals were also important; some design choices were made with the aim of providing pleasant, comfortable, and convenient living environments, or of giving the buildings a distinct aesthetic or some other special features. By comparing the professionals’ responses to the end-user surveys, it was found that the two groups had similar views concerning gain goals; both considered it important for apartments to be affordable and easy to maintain. However, their views on hedonic and normative goals differed markedly. The professionals sought to strike an optimal balance between different related aspects, whereas end-users placed greater importance on aspects relating to hedonic and gain goals when choosing dwellings. The findings provide a basis for constructive discussions on building design and development, and the scope for creating buildings that encourage end-users to adopt sustainable living practices while also satisfying their needs and preferences. (shrink)

Abstract This article evaluates the ?drive toward greater autonomy? in lethally-armed unmanned systems. Following a summary of the main criticisms and challenges to lethal autonomy, both engineering and ethical, raised by opponents of this effort, the article turns toward solutions or responses that defense industries and military end users might seek to incorporate in design, testing and manufacturing to address these concerns. The way forward encompasses a two-fold testing procedure for reliability incorporating empirical, quantitative benchmarks of performance in compliance (...) with formalized and programmable rules of engagement, and a conception of ?due care? in product liability. This would be designed in analogy with procedures currently followed by well-intentioned governments and militaries with their own (human) military personnel, both to ensure against failure, and to accept responsibility and compensate victims of inadvertent and unintended accidents. The procedure is designed specifically to address objections first posed by Robert Sparrow (2007) and Noel Sharkey (2007), and echoed in P.W. Singer's critically acclaimed Wired for War (2009), that lethal autonomous systems cannot be meaningfully held accountable for commission of war crimes, and thus the development, manufacture, and deployment of such systems would constitute a violation of international law. (shrink)

Designing an ontology that meets the needs of end-users, e.g., a medical team, is critical to support the reasoning with data. Therefore, an ontology design should be driven by the constant and efficient validation of end-users needs. However, there is not an existing standard process in knowledge engineering that guides the ontology design with the required quality. There are several ontology design processes, which range from iterative to sequential, but they fail to ensure the practical application of (...) an ontology and to quantitatively validate end-user requirements through the evolution of an ontology. In this paper, an ontology design process is proposed, which is driven by end-user requirements, defined as Competency Questions (CQs). The process is called CQ-Driven Ontology DEsign Process (CODEP) and it includes activities that validate and verify the incremental design of an ontology through metrics based on defined CQs. CODEP has also been applied in the design and development of an ontology in the context of a Mexican Hospital for supporting Neurologist specialists. The specialists were involved, during the application of CODEP, in collecting quality measurements and validating the ontology increments. This application can demonstrate the feasibility of CODEP to deliver ontologies with similar requirements in other contexts. (shrink)

The article argues for a shift of perspective in identity management (IDM) research and development. Accessibility and usability issues affect identity management to such an extent that they demand a reframing and reformulation of basic designs and requirements of modern identity management systems. The rationale for the traditional design of identity management systems and mechanisms has been security concerns as defined in the field of security engineering. By default the highest security level has been recommended and implemented, often without (...) taking end-user needs and accessibility issues into serious consideration. The article provides a conceptual framework for inclusive IDM, a brief overview of the regulatory status of inclusive IDM and a taxonomy of inclusive identity management methods. Several widespread IDM approaches, methods and techniques are analyzed and discussed from the perspective of inclusive design. Several important challenges are identified and some ideas for solutions addressing the challenges are proposed and discussed. (shrink)

Security has become one of the important factors for any network communication and transmission of data packets. An organization with an optimal security system can lead to a successful business and can earn huge profit on the business they are doing. Different network devices are linked to route, compute, monitor, and communicate various real-time developments. The hackers are trying to attack the network and want to draw the organization’s significant information for its own profits. During the communication, if an intrusion (...) or eavesdropping occurs, it will lead to a severe disfigurement of the whole communication network, and the data will be controlled by wrong malicious users. Identification of attack is a way to identify the security violations and analyze the measures in a computer network. An identification system, which is effective and accurate, can add security to the existing system for secure and smooth communication among end to end nodes and can work efficiently in the identification of attack on data packets. The role of information security is to design and protect the entire data of networks and maintain its confidentiality, integrity, and availability for their right users. Therefore, there is a need for end to end security management, which will ensure the security and privacy of the network and will save the data inside networks from malicious users. As the network devices are growing, so the level of threats is also increasing for these devices. The proposed research is an endeavor toward the detection of data packets attack by using the rough set theory for a secure end to end communication. The experimental work was performed by the RSES tool. The accuracy of the K-NN was 88% for the total objects of 8459. For cross validation purposes, the decision rules and decomposition tree algorithms were used. The DR algorithm showed accuracy of 59.1%, while the DT showed accuracy of 61.5%. The experimental results of the proposed study show that the research is capable of detecting data packets attack. (shrink)

Purpose– The purpose of this paper is to examine how Slow Tech can support the celebration of the 20-year series of ETHICOMP conferences, with its ethical and societal focus, building on earlier descriptions of Slow Tech. The paper takes Slow Tech’s ideas a step further to explore how a roadmap and concrete checklist of activities can be developed.Design/methodology/approach– The paper is a thought leadership or conceptual piece. Its approach is based on a normative, qualitative discourse. It, nevertheless, indicates a (...) shift towards concrete actions.Findings– Extracting from a brief historical overview, the paper lays out the means of building a Slow Tech roadmap and a Slow Tech checklist of actions. It also investigates a number of the challenges that might face Slow Tech in the future.Research limitations/implications– The paper has implications for stakeholder fields as far-ranging as corporations, computing professional associations, universities and research institutions and end-users.Originality/value– As with other investigations of Slow Tech, the value of this paper is in its call for reflection followed by action. It provides a useful complement and counterbalance to an earlier paper by the same authors: “Slow Tech: a quest for good, clean and fair ICT” published inJournal of Information, Communication and Ethics in Society(Vol. 12, issue 2, pp. 78-92). (shrink)

In voicing commitments to the principle that the adoption of artificial-intelligence (AI) tools by armed forces should be done responsibly, a growing number of states have referred to a concept of “Responsible AI.” As part of an effort to help develop the substantive contours of that concept in meaningful ways, this position paper introduces a notion of “responsible reliance.” It is submitted that this notion could help the policy conversation expand from its current relatively narrow focus on interactions between an (...) AI system and its end-user to also encompass the wider set of interdependencies involved in fulfilling legal obligations concerning the use of AI in armed conflicts. The authors argue that to respect international humanitarian law and ensure accountability, states ought to devise and maintain a framework that ensures that natural persons involved in the use an AI tool in an armed conflict could responsibly rely at least on: (1) the tool’s technical aspects, (2) the conduct of other people involved in development and use of that AI tool; and (3) the policies and processes implemented at the state level. According to the authors, the “responsible reliance” notion could serve, among other examples, as a basis on which to articulate legal requirements, prohibitions, and permissions across diverse areas, from the design of AI tools to human-machine interactions to configuration of responsible-command frameworks. (shrink)

Robots are increasingly being studied for use in education. It is expected that robots will have the potential to facilitate children’s learning and function autonomously within real classrooms in the near future. Previous research has raised the importance of designing acceptable robots for different practices. In parallel, scholars have raised ethical concerns surrounding children interacting with robots. Drawing on a Responsible Research and Innovation perspective, our goal is to move away from research concerned with designing features that will render robots (...) more socially acceptable by end users toward a reflective dialogue whose goal is to consider the key ethical issues and long-term consequences of implementing classroom robots for teachers and children in primary education. This paper presents the results from several focus groups conducted with teachers in three European countries. Through a thematic analysis, we provide a theoretical account of teachers’ perspectives on classroom robots pertaining to privacy, robot role, effects on children and responsibility. Implications for the field of educational robotics are discussed. (shrink)

Organisational Ethics could be more effectively taught if organisational agency could be better distinguished from activity in other group entities, and defended against criticisms. Some criticisms come from the side of what is called “methodological individualism”. These critics argue that, strictly speaking, only individuals really exist and act, and organisations are not individuals, real things, or agents. Other criticisms come from fear of the possible use of alleged “corporate personhood” to argue for a possible radical expansion of corporate rights e.g. (...) to claim a right to vote. Others say that if corporate businesses were persons, and judged as such, they would be sociopaths (Bakan 2004). Large corporate businesses are one kind of organisation, and if organisations were allowed to claim to be full persons, this would mean that the latter criticisms were valid. The proposed account goes between the horns of the above dilemma: impersonal aggregates or full persons. It avoids both the reductive individualism and expansive, full personhood account. It gives grounds for attributing and distributing praise and blame to organisations as whole complex entities, and to their parts. Primarily, responsibility belongs to Board incumbents within them, on the basis of their goals; their direction of the acts of the other main internal role incumbents, managers and staff, and enablers, in the role structure; their own ethical decision methods; the impact of their acts on external stakeholders like end-users, other players in the practice or local community, and on the state. These factors are picked out on the basis of a theory of meaning Aristotle’s theory of analogy of attribution, some architectonic features of his Philosophical Anthropology; and Neo-Aristotelian Virtue Ethics (NAVE). The paper expounds a quasi-person model of organisations, (QPM), previously described in this journal (Ardagh 2011, 2012, 2013). This model identifies functional similarities at three levels, between capacities within natural persons (NPs) on the one hand and the roles/ incumbents within the structure of organisational artificial/quasi-persons (APs on the other). In each entity, we find an architectonic direction, sub-ordered operational entities, and enablers (a DOE structure) in a communicative structure or reporting chain of authority. The common elements between natural persons (NP) and artificial persons (AP) and their ethically relevant attributes are captured in an acronym –GRAEOS. Both persons and organisations have a “top” entity capable of having/choosing worthwhile ethically permissible goals, G; of architectonically directing the use of capacities/repertoires or incumbents in designed architectonic roles, R, within a DOE-type structure, well or badly; of using ethical decision making procedures, E; of execution of good choices for the person or organisation in action, A, with good or bad impacts on others, or with others, O, in the context practice or domain; and of having good relations with the law and the state, S. Application to the 1989 Exxon Valdez disaster, and public sector organisations, is briefly discussed to illustrate the potential to deal with short or long case study narratives. (shrink)

Brain–Computer Interface research is an interdisciplinary area of study within Neural Engineering. Recent interest in end-user perspectives has led to an intersection with user-centered design. The goal of user-centered design is to reduce the translational gap between researchers and potential end users. However, while qualitative studies have been conducted with end users of BCI technology, little is known about individual BCI researchers’ experience with and attitudes towards UCD. Given the scientific, financial, and ethical imperatives of (...) UCD, we sought to gain a better understanding of practical and principled considerations for researchers who engage with end users. We conducted a qualitative interview case study with neural engineering researchers at a center dedicated to the creation of BCIs. Our analysis generated five themes common across interviews. The thematic analysis shows that participants identify multiple beneficiaries of their work, including other researchers, clinicians working with devices, device end users, and families and caregivers of device users. Participants value experience with device end users, and personal experience is the most meaningful type of interaction. They welcome end-user input, but are skeptical of limited focus groups and case studies. They also recognize a tension between creating sophisticated devices and developing technology that will meet user needs. Finally, interviewees espouse functional, assistive goals for their technology, but describe uncertainty in what degree of function is “good enough” for individual end users. Based on these results, we offer preliminary recommendations for conducting future UCD studies in BCI and neural engineering. (shrink)

(1993). A “user“‐designed mediation approach, fostering evolutionary consciousness and competence. World Futures: Vol. 36, Evolutionary Consciousness, pp. 155-164.

The continuous development of information communication technology facilitates the conventional grid in transforming into an automated modern system. Internet-of-Things solutions are used along with the evolving services of end-users to the electricity service provider for smart grid applications. In terms of various devices and machine integration, adequate authentication is the key to an accurate source and destination in advanced metering infrastructure (AMI). Various protocols are deployed to lead the identification between two parties, which require high computation time and communicational bit (...) operations for system development. Therefore, Kerberos-based authentication protocols were designed in this study with the assistance of elliptic curve cryptography to manage the mutual authentication between two parties and reduce the time and bit operations. The protocols were evaluated in a widely adopted tool, AVISPA, which builds an understanding of the proposed protocol and ensures mutual authentication without unauthorized knowledge. In addition, upon comparing security and performance assessments to the current schemes, it was found that the protocol in this study required less time and bits to transmit information. Consequently, it effectively provides multiple security features making it suitable for resource constraint smart meters in AMI. (shrink)

Purpose This paper aims to look at shifts in internet-related content and services economies, from audience labour economies to Web 2.0 user-generated content, and the emerging model of user computing power utilisation, powered by blockchain technologies. The authors look at and test three models of user computing power utilisation based on distributed computing two of which use cryptocurrency mining through distributed pool mining techniques, while the third is based on distributed computing of calculations for scientific research. The (...) three models promise benefits to their users, which the authors discuss throughout the paper, studying how they interplay with the three levels of the digital divide. Design/methodology/approach The goal of this article is twofold as follows: first to discuss how using the mining hype may reduce digital inequalities, and secondly to demonstrate how these services offer a new business model based on value rewarding in exchange for computational power, which would allow more online opportunities for people, and thus reduce digital inequalities. Finally, this contribution discusses and proposes a method for a fair revenue model for content and online service providers that uses user device computing resources or computational power, rather than their data and attention. The method is represented by a model that allows for consensual use of user computing resources in exchange for accessing content and using software tools and services, acting essentially as an alternative online business model. Findings Allowing users to convert their devices’ computational power into value, whether through access to services or content or receiving cryptocurrency and payments in return for providing services or content or direct computational powers, contributes to bridging digital divides, even at fairly small levels. Secondly, the advent of blockchain technologies is shifting power relations between end-users and content developers and service providers and is a necessity for the decentralisation of internet and internet services. Originality/value The article studies the effect of services that rely on distributed computing and mining on digital inequalities, by looking at three different case studies – Coinhive, Gridcoin and Cryptotab – that promise to provide value in return for using computing resources. The article discusses how these services may reduce digital inequalities by affecting the three levels of the digital divide, namely, access to information and communication technologies, skills and motivations in using ICTs and capacities in using ICTs to get concrete benefits. (shrink)

In this article, the authors present the framework of a model that integrates strategic product development decisions with the product's impact on future conditions of resources and the environment. The impact of a product on stocks of nonrenewable sources and sinks is linked in a feedback loop to the cost of manufacturing and using the product and to the end-users' preference for a sustainable product. Two product development scenarios are analyzed to illustrate the model's capabilities. These cases represent widely different (...) market conditions and strategies in product development vis-à-vis sustainable product design and manufacturing. Future work must focus on application of the present framework to cases of realistic products and markets to further develop the model as a useful decision-making tool. The model might also serve as a means of analyzing normative resource-cost scenarios in regulatory policy mechanisms for sustainability. (shrink)